This on a gen 3 block? looks like it they can be tricky with the ls1 style manifold.. glad you did your home work or you already knew.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Thanks man, the PVC system seems to be one of the overlooked or neglected systems in my opinion. I used to do tons of Weber carb swaps and tuning back in the day and a good PVC system would make them run smooth and make jetting a breeze.
I have a buddy that his would squeel cause the pcv was off. he drilled a hole in the oil cap for a test run and I think it's still that way.
Trailer park turbo.I have a buddy that his would squeel cause the pcv was off.
I like the design of the wheels, very retro for 20's.
Are they going to be painted or powder coated?
I’m painting the backside and the shell with Rustoleum oil base and primed the face then will hit it with a Rustoleum Hammered grey/silver spray. US Wheel in Huntington Beach made these wheels for me at 3.75 backspaced raw steel so I could paint them myself.
Are you going with a weld on beadlock?
No these are my street wheels. I have a set of 17” spyderloks with 43 Mickey Thompsons for the trail
That should be an accurate description of a 46x19.5". I think MVT represents the LMTV/FMTV vehicles.
Turn off the seat warmer
Glad your back to making progress.
