Yeah those don’t look very good right now. I do have a real nice set of fitted nylon Cordura seat covers for them complete with armrest and headrest covers.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Reminds me of these.
Good ole Racerback fairing
I changed the diagonals in between the two top bars. They are only 5.5” apart and frankly it takes less time to stretch masking tape than cutting 4 long 70 degree copes. So I opted for straight pieces and some 1” tubing diagonals.
Going to plate the slider just like this slider step I made for an FJ40. Can’t really tell from the picture but the plate is turned up where it meets the bar so that it catches the sole of your shoe. Handy dandy for when your out snow wheeling.
Great stuff dude!
Thanks I feel that I’m 80percent done with the fabrication.
Remember the water fill next to the gas fill in the frenched spot on the drivers fender? Pepperidge farm remembers. Here is the 9 gallon water tank made from 4” abs. I’ll pressurize this with 30 psi or so from the air compressor and put a coiled hose with a spray nozzle. Great for super dirty windshields, muddy dogs, fires ,etc.
Is this you?
It is a 1way check ball valve.
Pepperidge farm remembers
