Sweet. 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
beags86
Eastbound and Down
Willwood makes some for roughly the same price point that has more race-ee holes for the bracket.
The Willwood one is more like sex on a branch? Sex on a log??
Maybe just "more better".
Wilwood 260-12697 Billet Master Cylinder Reservoir Kit, 4 oz, Aluminum
beags86
Eastbound and Down
Sweet trans.
But who's big block trike?
Customers. It’s an LS3 Boss Hoss. I rebuilt the 4l60e.
Here’s a better shot of the trike. And a really nice c10 I replaced the pan gasket and shift shaft seal on today.
That c10 is gorgeous.
It’s really well done. Was very careful working on it. Blueprint SBC/700R4 with edelbrock EFI.
Makes me happy it’s not an ls.
beags86
Eastbound and Down
Fixed.
Haha.
First thing I thought to was. Sweet! Small block.
Just like God intended.
TPI would be better yet!
Martin
Martin
Swapping winches between my Jeep and Chevy. The one on the Jeep has a 10k lb motor and the Chevy had the regular 8k lb. Made sense to me to swap them.
Magnum Underdrive ordered today from ORD. Will be awhile before I receive it. I’m stoked though.
Also a while before I can install. I went back to my old Job at the machine shop. May be able to machine the transfer case at work.
My magnum showed up about 2 weeks ago. Not going to be able to install any time soon. But it’s here. About to start home shopping in January and working in this crappy rental dirt driveway is all I have til a house. So I’m sure you all know how that goes.
Installed some KC day lighters I’ve had around. Made the mounts on the cab cause the old bed is so wobbly when bombing around. Also finished some more of my loud, but economy stereo stuff and added a 12” sub firing down that will also be a center console arm rest eventually. Will have to fab a cover.
Also mounted my tire upright so I can have the small amount of bed to take my dog or do mild truck stuff or go shooting in woods etc.
It looks like poo but it’s strong, bolted and strapped in. The bed metal and floor are weak so as always it could be expected to fail, but I’m sure it’ll hold like iron I know it. The hooks are welded to the weak metal strips in the floor but seem to be solid for now. And that is an extra hydro assist mount it’s holding to on the bed rail. All of this was done with leftover scraps. And the stereo is all Amazon warehouse’s scratched and dent sale items. It is loud and does bump the old cab pretty well.
I am saving for an HP tuners mpvi3 unit. I wanna be able to adjust my pcm and do tuning myself. I have two pcm’s and they both run well but need adjustments.
Also wired up the seat heaters for the PRP’s so will see how warm those are. Didn’t test other than turn them on and feel a little warmth.
Installed some KC day lighters I’ve had around. Made the mounts on the cab cause the old bed is so wobbly when bombing around. Also finished some more of my loud, but economy stereo stuff and added a 12” sub firing down that will also be a center console arm rest eventually. Will have to fab a cover.
Also mounted my tire upright so I can have the small amount of bed to take my dog or do mild truck stuff or go shooting in woods etc.
It looks like poo but it’s strong, bolted and strapped in. The bed metal and floor are weak so as always it could be expected to fail, but I’m sure it’ll hold like iron I know it. The hooks are welded to the weak metal strips in the floor but seem to be solid for now. And that is an extra hydro assist mount it’s holding to on the bed rail. All of this was done with leftover scraps. And the stereo is all Amazon warehouse’s scratched and dent sale items. It is loud and does bump the old cab pretty well.
I am saving for an HP tuners mpvi3 unit. I wanna be able to adjust my pcm and do tuning myself. I have two pcm’s and they both run well but need adjustments.
Also wired up the seat heaters for the PRP’s so will see how warm those are. Didn’t test other than turn them on and feel a little warmth.
Cool truck
Thank you!
I didn’t plan on working on this today. But my mind was restless and this settled it. The magnum nv4500 is rolling.
It gave all the mashed tater shifts it could for 45 years. Once the swap is dialed I may sell it to the next redneck on market place for a case of sparkling water and a frozen pizza.
Look at it.
Look at it.
Also, I bought bling over the last few months. I’m the worst. I also just bought an empty big bearing NP205 case a while back for the price of machine work. So there’s that too.
I also bought a new cam for this bitch that’s not in yet and an HP tuner MPVI3. Joy.
