I used a router when I did mine too. Works great!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
I don't remember having to do anything to make mine fit.
Martin
Martin
I put them on my 07 dodge. Shhhh don't tell anyone.
I'm talking about putting them on a GM Dana 60.
Martin
Martin
FWIW the Ferd's and Dodges need a larger center bore. I've heard the H2's only need to be opened up a 1/16" for the chevy60. I tried to measure the D60 last night but my caliper jaws aren't long enough. As far as the 14B goes, some say it needs to be opened up while others say it does not. I think some of the confusion is with the later model AAM FF axle, I'll find out after I get the tires dismounted.
is it summer yet? 
It feels like it, I'm sweating like a whore in church with my welding jacket on.
Didn't see the woman with loose morals and a welding jacket today in sacrament...
Wrong church
Frame is boxed and done!
Wooooo hoooo
Odd. I just used a wire brush to clean the rust off of my Dana 60 hubs, and slid them on. Definitely a tight fit though.
Glad to see you haven't painted them!
Martin
Glad to see you haven't painted them!
Martin
Maybe the rust ate away enough and the lack of paint. It won't take much to make them fit right.
And I'm not painting them.
Definitely could be. It was a rusty Dana 60.
Glad to hear about the lack of paint!
Martin
Glad to hear about the lack of paint!
Martin
Last night when I was looking things over I found an area that could be a potential weak spot.
right where this line is.....
Option 1 and I box a short section so I can still access the bolts for the A-Bomb
Or option two and I cut a couple 1/4" gussets that slide in between the two backing plates
right where this line is.....
Option 1 and I box a short section so I can still access the bolts for the A-Bomb
Or option two and I cut a couple 1/4" gussets that slide in between the two backing plates
Last night when I was looking things over I found an area that could be a potential weak spot.
right where this line is.....
Option 1 and I box a short section so I can still access the bolts for the A-Bomb
Or option two and I cut a couple 1/4" gussets that slide in between the two backing plates
I like option #1. Option #2 seems like more pressure to a smaller area.
I may try a hybrid of both, I would like some sort of triangulation for the winch pulls.
said only losers who plan to get winched and or hang out with other losers
