anything is possible at this point but it doesn't feel like that to me. When I get it up on jack stands tonight for an alignment I'll go lock to lock a dozen times with the engine off and then on again.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
anything is possible at this point but it doesn't feel like that to me. When I get it up on jack stands tonight for an alignment I'll go lock to lock a dozen times with the engine off and then on again.
Sounds completely unsafe to operate. You already have my address so just go ahead and have the wrecker drop it off here. I’ll make sure nobody gets hurt.
unsafe at highway speeds for sure!
I was just thinking that the ram was something you changed since driving last.
Coming home from camping late last summer it was kinda doing the same thing, I thought it was the 17' canoe on the roof but now I'm thinking it's the same issue.
Leaf spring or linked?
Did you check your bearings?
Mine was doing that for almost a year until I checked the bearinga and tightened them up
leaf springs (52/57"). Have not checked the bearings, I'll add that to the list of things to check.
Great progress!
Front upper shackle bolts were a little loose letting the shackles rock left to right. Took it up to 60+ mph and it felt good. I’ll double check the alignment this weekend, don’t want to tear up the newish nittos.
CrpMag122
1/2 ton status
Gotta love an easy fix.
Bought a new CB Antenna after I snapped the other off. This one is on a spring so it has a fighting chance, tuned it last night so I'm ready to go there.
still likes fuel too
This weekend I'll be topping off fluids, rechecking a few bolts, pack and head out to the trail Monday AM.
Oh and I need to finish the skid plate, couple more tabs and it will be done.
Oh and I need to finish the skid plate, couple more tabs and it will be done.
yeah I should put a ball on it probably.
I run my antenna on a spring like that. It gets folded to a 90 all the time still works great. My buddy put a tennis ball on it after watching it bounce off my hood all day.
Yeah I can see it slapping the cab pretty hard when it gets bent back. I'll add a ball.....
I'm having a similar issue but I only have crossover no Hydro it feels like a bad rag joint but it's all new, either way even if you wander you truck looks mean!
I'm having a similar issue but I only have crossover no Hydro it feels like a bad rag joint but it's all new, either way even if you wander you truck looks mean!
Thanks. On the steering issue, have someone turn the wheel left/right as you watch from below. Look for anything loose, sloppy or out of the ordinary. Took me all of 3-5 seconds to see the issue....
