CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

'86 Jimmy 4in Lift, 40’s, tons, 8.1 Swap- 700r4 said PNNNNN

This is not a dedicated trail rig, but does trailer to the destination usually. I am currently in the planning phase of doing a 52/56" spring swap, and getting back to being more road worthy.
All lines ran. Still need to secure the 2 lines for the ram, and make sure they don’t rub any sharp edges. Also need to pull the pump line and get the new fitting on. After that it’s order the steering adapter and see how it feels.

Hose orientation. Last open port runs to the pump.
5B763E48-933C-4AEA-9592-42C676CC3548.jpeg

81972CE6-7AE8-49B3-B0AD-F02E399C2512.jpeg
 
Also, the picture on PSC website says left and right, it doesn’t tell you if you’re in the vehicle or looking at it from the front. But one of those is more obvious... anyway, I hooked mine up backwards first :D

Gonna run a big cooler? Mine sounded like it was getting hot, but I had he stock Escalade steering cooler and no extra resivoir.
 
Also, the picture on PSC website says left and right, it doesn’t tell you if you’re in the vehicle or looking at it from the front. But one of those is more obvious... anyway, I hooked mine up backwards first :D

Gonna run a big cooler? Mine sounded like it was getting hot, but I had he stock Escalade steering cooler and no extra resivoir.
I did an external cooler back when I went assist. Just an o’Reillys auxiliary cooler.
 
Top Bottom