CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Stock shackles are temporary. Going to get 6 " shackles and see how that works.
This is with the truck on the ground.
Looks good.
Don't forget your cotter pins
Don't forget your cotter pins
The 52's moved the axle forward about 2.5". Going to probably de-fang it.
Got the cali lean now
Got the cali lean now
Looking good sir.
Don't forget your cotter pins
You are always there for cotter pin correction lol.
don't want anyone killing a bus of nuns
I need suggestions for brake hoses. I don't have anything yet.
want rubber or braided SS?
I run WFO's front and rear. https://www.wfoconcepts.com/cr/Brake-Lines/3189/3890
I run WFO's front and rear. https://www.wfoconcepts.com/cr/Brake-Lines/3189/3890
I used 88-98 c1500 lines on mine. They are pretty long/cheap
LIVEAnimals
1/2 ton status
Cali lean hahaha
On a serious not this is already turning into a great build as was your last rig. Every mod is done so clean, I like it man
BTW I can't stand those cali flat hat D bags
On a serious not this is already turning into a great build as was your last rig. Every mod is done so clean, I like it man
BTW I can't stand those cali flat hat D bags
Thank you, Sir.
Cheaper is better lol. Might try the c1500 lines.
I've got them on my 80 k10, seemed to do the trick. 3" of lift and there's tons of slack, to much almost.
There's another guy on here running them. Cant remember who off hand though.
Where did you get the Dana 60 hub caps?
Martin
Martin
They're the old broken ones. I juse set them on for it to sit outside. Still looking.
wetoolowdingbangow
1/2 ton status
Earls ss brake lines off summit! Stupid cheap and they have them in all sizes. I think a 28 inch one was like 12 bucks!
I run the c1500 lines as well with the 4 inch lift. Got a lot of wiggle room.
What paint are you using on the frame?
What paint are you using on the frame?
