Summit machine?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Blazer's 85 Suburban "Twinkie"
- Thread starter kgblazerfive
- Start date
No they are Trail Gear Creeper joints.
$200 for all 8
$200 for all 8
dang, that's cheap
Used but not used just used as mock up's
Lot cheaper this way.
Just saw your suburban on Dirthead Daves latest video during fullsize invasion "hey I know that guy"
Just came in to say the same lol
And is that also Jack’s old blue truck Wade did the bed in?
And is that also Jack’s old blue truck Wade did the bed in?
No that is Caleb's he is from OK, Tulsa I think.
- Joined
- Mar 3, 2000
- Posts
- 9,127
- Reaction score
- 7,092
Yes Capt. Ron owns it now
A few posts ago you may remember that I was having water under my door issues.
Fixed it. I pulled up the door seal, resealed it with some Gorilla glue, not silicone this time, as well as turned the seal around, helps if you read the instructions. Wala it works great, we have had a bunch of rain and no water under the door of my shop.
Fixed it. I pulled up the door seal, resealed it with some Gorilla glue, not silicone this time, as well as turned the seal around, helps if you read the instructions. Wala it works great, we have had a bunch of rain and no water under the door of my shop.
Some shop pictures.
One more piece and the wall will be done.
Need to screw the bench top down but it works.
One more piece and the wall will be done.
Need to screw the bench top down but it works.
another shop update
big table has the spot for the chop saw.
Little table will get the band saw, aka swag port-a-band
next to the little table will be the drill press, not bought yet but soon. I may put it in between the two. The little table still needs to be cleaned up and painted might be Saturdays project or sooner cuz it might rain on Saturday.
Cabinets were from a office that my wife's work was getting rid of. Have a couple of uppers to put in still too.
big table has the spot for the chop saw.
Little table will get the band saw, aka swag port-a-band
next to the little table will be the drill press, not bought yet but soon. I may put it in between the two. The little table still needs to be cleaned up and painted might be Saturdays project or sooner cuz it might rain on Saturday.
Cabinets were from a office that my wife's work was getting rid of. Have a couple of uppers to put in still too.
Probably going to paint the 2x4's too.
That is looking like an awesome work space! I bet you smile every time you walk in there.
Yes I do, and I thank my wife for helping us get it all the time.
Another off the wall update, got Twinkie's OG front doors back. Not sure what I am going to do with them but they are in my shop now.
Went wheeling on Thursday- Saturday. Went out to Vernal UT, some really good trails.
Good views and a few broken parts.
Hit my muffler it disconnected.
Lost a fender bolt.
Had too low of transmission fluid and got denied on a obstacle. Ended up putting three quarts in to get it where it needed to be. Been a bit since I checked it.
Good views and a few broken parts.
Hit my muffler it disconnected.
Lost a fender bolt.
Had too low of transmission fluid and got denied on a obstacle. Ended up putting three quarts in to get it where it needed to be. Been a bit since I checked it.
Shop update, walls have plywood on them. Still have under the mezzanine not going to worry about that for now. Just have to paint them all white.
