ProJunkRacing
1/2 ton status
I just pulled apart my lockouts and have some broken inards i want to get flanges but do they make them for 30 spline applications or what would you all reccomend
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
D60 Lockouts
- Thread starter ProJunkRacing
- Start date
jus bought new 30spl warn premo's for $165 from porc
i have a set of stock gm/dana 30 spl flanges. thay did use them.
ProJunkRacing
1/2 ton status
sweetk30 said:
well i meant like the warn flanges it will be welded with x over and hydro assit and want strong but not 35 spline yet
sandawgk5
3/4 ton status
Welded and slugs I see ram assist in your future, as well as some busted stubs.
Ira
Ira
BLZN4FN
1/2 ton status
www.tellico4x4.com has them for a D60 30 spline
ProJunkRacing
1/2 ton status
i see they have them for 211 but what is worth it hubs or slugs?
181 for warn d60 hubs
181 for warn d60 hubs
As already mentioned factory 30-spline flanges were pretty common and you could probably find some around with all of the people switching to either hubs or 35-spline stuff.
I doubt you will ever break a 30-spline factory flange.....it's a single solid piece of metal and has to be a lot stronger than any locking hub out there. You will definitely break a Spicer 30-spline stubshaft before the flange. I've personally broke 2 Spicer 30-spline stubs and they did not phase the factory flanges. Another friend (78Buford) is running factory flanges that were broached out to 35-spline and has had no problems.
I doubt you will ever break a 30-spline factory flange.....it's a single solid piece of metal and has to be a lot stronger than any locking hub out there. You will definitely break a Spicer 30-spline stubshaft before the flange. I've personally broke 2 Spicer 30-spline stubs and they did not phase the factory flanges. Another friend (78Buford) is running factory flanges that were broached out to 35-spline and has had no problems.
sandawgk5
3/4 ton status
Where would one look to find a set of factory 30 spline flanges?
Ira
Ira
sandawgk5
3/4 ton status
Thanks I will check E-bay
Ira
Ira
ProJunkRacing said:
bro, i bought d60 warn premiums for $165....
ProJunkRacing
1/2 ton status
muddybuddy said:
where?
performance offroad center. normally they are like $200. i got the quote off pirate and they said $165 (discount for bein on pirate). so when u order tell them ur from pirate and give them ur username and you are good to go.
79k20350 said:i got warn premiums still in packaging for $90
damn, you got really lucky there. u practically stole them!
79k20350 said:
less splines is a good thing now?! Most good aftermarket flanges have much more contact area between the flange and the axle than your average hub or warn-style thinner flanges... they should be stronger.
j
ProJunkRacing
1/2 ton status
jekbrown said:
explain
