I got the 26" US General box bottom with top in black. Good box. Everything was stuffed in that Craftsman and Matco box. For a home gamer, cant beat it.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Got any cool tools lately?
- Thread starter nvrenuf
- Start date
I have the first generation in red. don't really need another but I have been jonesing for the green one.
Yeah when I get to the bottom tray I 'm sure there will be treasures I put there years and years ago, and never touched again. My glad hand trailer air tools were/are still on top. I haven't done a big rig trailer inspection in 8ish yearsNice improvement! Damn, your old craftsman cart look like a homeless camp
I think there is a an antique Civil Defense geiger counter on the bottom self I found in some salvage pile years ago. A box full of spark plug wires no complete sets. Some hoses that were used for draining coolant, hyd oil, or testing fuel pressure. The top work area I had clean in March 21, doesn't take long to start collecting stuff that doesn't have a proper place. To be fair I have been using it to do the front axle work and all the tools on top were used the day before, and will mostly be used today.
I picked these up the other day.
I want the long version of those.
I didn’t even know they had a long version
That’s cool that you can lock the angle too.
Anyone reading this ever try or know someone who has one of those topside engine creepers? I just spent 2 days leaning over my buddies ford 6.7 doing a cp4 disaster prevention kit and weight loss products. My back and knees are not happy about it. Going to be doing a cp3 swap on my LML in the near future and and looking at a topside very seriously.
Don’t even think twice. Buy that ho.
I used them at work they are ok, but sometimes interfere with you using your arms as you like. Plus they can be in the way, you have to get off to reposition. I was able to move the a small amount while on top.
These days I have a 2x3 knelling pad I lay on the engine bay and lay on that. Doesn't help with getting down to reposition, but I find it doesn't bother arms getting at stuff
These days I have a 2x3 knelling pad I lay on the engine bay and lay on that. Doesn't help with getting down to reposition, but I find it doesn't bother arms getting at stuff
Well ebay is my new snap on dealer, with out the assume the position for the discount.
Short arms wouldn't bit had to switch to long arms.
Only little more than 2x what I spent on Taiwan crap, but less than 1/2 of new on Snap-on truck. This tool is 50 years old by date code I expect my kid will be using it long after I'm gone
Short arms wouldn't bit had to switch to long arms.
Only little more than 2x what I spent on Taiwan crap, but less than 1/2 of new on Snap-on truck. This tool is 50 years old by date code I expect my kid will be using it long after I'm gone
Nice puller. I buy a lot of SnapOn and Mac off of eBay.
Hope the m12 one is as good as I hear the m18 one is. It’s on sale too at Home Depot.
what's your review of it?
- Joined
- Mar 3, 2000
- Posts
- 9,123
- Reaction score
- 7,076
Thanks now I know what the tool I was looking at earlier tonight is for! Had one for a while that was given to me but didn't know what it was.
it will work on many bind hole bearings, like clutch pilot bearing.
So far the box is very nice lol. I’ll get around to it.
I have the M12 grease gun and it's worked fine for me. I put one of the lube locker ends on it.
