CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
How will my K5/truck look with xx" tires on xx" of lift?
- Thread starter steve_kibbe
- Start date
blazerz
badnews
that top fit's nice.......i need to get one........
Thanks! Lots of progress done this last month. I'll update my build thread when I get a chance
How were they able to post a pic on their first post?
I'm not complaining, just here I've been telling people there is a 5 post minimum before you can post pics.
I'm pretty sure if you link it through somewhere like photobucket it doesn't matter what your post count is...
y5mgisi
1 ton status
Damn thats bad ass!
StuGutz
Registered Member
4 inch all spring lift. 38's and a little trimming . yes that is my wifes finger in top photo lol
It looks like the wife is pushing down on the Blazer flexing it's suspension.
That's a nice, clean looking dirty Blazer.
That's a nice, clean looking dirty Blazer.
StuGutz
Registered Member
It looks like the wife is pushing down on the Blazer flexing it's suspension.
That's a nice, clean looking dirty Blazer.
Every little bit helps- LOL
andyblack
Registered Loser
Since you've got the front bumper cut down like that, you should trim the fangs off the front fenders. Your Blazer looks real cool too.
trav0302
1/2 ton status
thats funny it does look like shes pushing the blazer down! LOL
StuGutz
Registered Member
Since you've got the front bumper cut down like that, you should trim the fangs off the front fenders. Your Blazer looks real cool too.
In the top photo you can sorta see the winch mount i built and have since trimmed the fangs and more trimming to the rear of front fender. Can actually turn now
. Also added a receiver to front and tied it into front crossmember. Always changin thing's. 
ramified96
Registered Member
I cut the fenders. Those are Bushwacker cut outs.
SUPER'BURB
1/2 ton status
Front Dana 44 axle moved forward 1 1/2" with zero rates on "old" 4" front springs.
Rear 14 bolt full floater with stock springs and blocks (for now).
36" x 14 1/2" Parnelli Jones Dirt Gripz on 16" x 10" wheels.
Rear 14 bolt full floater with stock springs and blocks (for now).
36" x 14 1/2" Parnelli Jones Dirt Gripz on 16" x 10" wheels.
Hey that turned out good! I'll have to show my dad the pics of his old 'burb.
SUPER'BURB
1/2 ton status
So far so good........ I was gonna send you some pics but I'm not done yet, LOLOLOLO!!!!!!! I said DONE!
waybad1
1/2 ton status
Thanks
I doesnt look so good now after this weekend!
I doesnt look so good now after this weekend!
I've never actually posted in this thread and figured it'd be a good chance for some pic whoring, erm, sharing my knowledge/experience
.
72 Blazer
D60/14FF w/ 4.56's
Front has Toyota superlift 6" springs with zero rate pushed 1.5" forward and 8* shims, with 7 1/2" shackles
Rear is 4" Rough Country EZ rides with DIY 4" shackle flip, zero rate pushed 1.5" back 4.5* shims and 7 1/2" cross-tied shackles.
14" travel bilstein 5150's front and rear with ford towers up front and customs out back. Also made some sweet Timbren bumpstops for front and rear.
ORD crossover/highsteer
Sitting on 15/39.5-15 TSL's on 2.5" BS steelies.
. 72 Blazer
D60/14FF w/ 4.56's
Front has Toyota superlift 6" springs with zero rate pushed 1.5" forward and 8* shims, with 7 1/2" shackles
Rear is 4" Rough Country EZ rides with DIY 4" shackle flip, zero rate pushed 1.5" back 4.5* shims and 7 1/2" cross-tied shackles.
14" travel bilstein 5150's front and rear with ford towers up front and customs out back. Also made some sweet Timbren bumpstops for front and rear.
ORD crossover/highsteer
Sitting on 15/39.5-15 TSL's on 2.5" BS steelies.
WOW! 
andyblack
Registered Loser
Awesome truck and beautiful scenery. Looks like a calender pose to me. Or a desktop background.
