Got the driver side window, new seals, and components put in yesterday.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Been a min since I posted us working on the truck !!!
Got the Dakota dash installed finally!
It’s been a headache working on the wiring but we are just about done!
Got the Dakota dash installed finally!
It’s been a headache working on the wiring but we are just about done!
What headers did you use and how was the fit?
Schoenfeld part# 1302ls1. They clear the frame but is close to the shift linkage. We had to move the linkage line up on the frame closer to the front of the truck.
Pro tip….dont trash your old harness until everything is complete. Never know when you may need some plugs or wire for the swap. Had to track down the old plugs for the windshield wiper motor!
Bringing the truck to muffler shop tomorrow. Ordered shocks today. Got insurance put on the truck. Getting very close to getting this thing on the road!
Picked up the truck from exhaust today. Pretty pleased how it turned out. We ran a single 3” out the passenger side. 
Also got the shocks on the truck. Took it for a little test drive. Coming together!!!
Looking good!
A test drive, that's awesome!
Was able to finally charge the A/C today. It blows some ice cold air. 
New stabilizer shock is on as well! 
Swap has come out pretty clean!
Looks fantastic!
I like the factory air box.
Where is the air coming in from?
Where is the air coming in from?
Still has the opening next to the fender and the bottom towards the front core support. We had to cut some of the bottom out to make it fit level and clear the hood which also helped with air flow. It was also turned around to the driver side due to original 2007 being on the passenger side.
Taking notes.
seat belts and center console installed. Also the floor shifter was bolted up. It was out of adjustment with the advanced adapter. Had to ad more threads to linkage but is perfect now. 
Also put the head liner in. Not bad for $20 worth of materials from hobby lobby. 
The body lines need just a little fine adjustment. Running out of stuff to do!!
