Everything is complete, but the air pump itself is in rough shape.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
OFFICIAL* Dante's Peak Suburban Build *
- Thread starter Metrodps
- Start date
I need belts too. Forgot that part
I could send the air pump I have. Not sure of the condition but it looks okay FWIW.
Hey guys, I'm making some progress on this thing. I am looking for a couple things. 700 r4 harness, greg is supplying an auto ecm. Also the strut bars and mounts that go from bellhousing to engine.
I think that should about cover it
I think that should about cover it
beags86
Eastbound and Down
How long are those strut bars? Are they all the same? It's seems to me they had different lengths. I think I might have some laying around. Get the lengths and get back to me. Pretty sure I do not have the corresponding engine motor plates.
Last edited:
I think I have a couple strut bars too. I will look
I'm not too sure how it mounts to the engine so maybe someone with a 700 can measure them?
They go to a bolt on the motor mount. At least on my 6.2 pretty sure most of that stuff is the same
beags86
Eastbound and Down
Can someone make a post in the wanted section for me?
Looking for 700 harness out of tbi truck. Linkage from column to transmission including bracket on frame. Those strut rods and mounts. Thanks!
Looking for 700 harness out of tbi truck. Linkage from column to transmission including bracket on frame. Those strut rods and mounts. Thanks!
Is done. I can't find my extra strut rods
Thanks man!
So status update to this point, engine and trans are installed. Need to time the engine (I work on class 8 trucks and construction equipment for a living so I have yet to buy a timing light). Then install the various parts I need and figure out wiring on the 700r4.
beags86
Eastbound and Down
If the engine is in its going to be a pain to install the plates for the strut rods. The plates sandwich in between engine and mount. You can do it but its a pain in the neck.
At this point I don't have a choice. Hopefully I can get the plates and rods. I want this thing to be right when it leaves
damn, I brought extra rods and a T-case rod to BB, nobody took them so in the dumpster they went 
damn
damn
beags86
Eastbound and Down
It's going to take me two weeks to get back to the farm to check if I have strut rods and plates. FYI.
Last edited:
I found a set of plates and rods, I believe that I took them off a 350/ 4l80e. They should be correct? I don't know if I have the shifter parts, I will look today.
y5mgisi
1 ton status
When do you need the timing light? Do you have someone you can borrow one from?
