been running the original plow truck for almost 10 years like this and not 1 problem .but yes will prob make a cool spot / mount for it .
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
PLOW MACHINE / sleeping quietly : 237 6 shifter levers !
- Thread starter sweetk30
- Start date
been running the original plow truck for almost 10 years like this and not 1 problem .but yes will prob make a cool spot / mount for it .
so today was great outside I had the doors all open . cleaned out a bit . moved stuff around .
also felt like I needed to see it as a truck finaly .
got my new pair of Dayton spring 22-547 rears . also some round bend u-bolts to convert from the other style . even pressed out the rubber bushings and installed the poly kit with greaseable bolts from ord . and hung them on a set of kirt's diy4x usdr shackles .
used the 3" factory lift blocks I got from a member here from my wanted parts ad I had up for a long time.
front is on some super stiff 4" lifts . going to be changed out at some point later with tuff country 3-4" hd packs. not sure yet .
she is on 235/85/16 tires on stock rims. I think she looks DEAD SEXY
she is a bit tall at this point but she is missing a lot of WEIGHT . motor/4l80-e/203-205 doubler kit .
also felt like I needed to see it as a truck finaly .
got my new pair of Dayton spring 22-547 rears . also some round bend u-bolts to convert from the other style . even pressed out the rubber bushings and installed the poly kit with greaseable bolts from ord . and hung them on a set of kirt's diy4x usdr shackles .
used the 3" factory lift blocks I got from a member here from my wanted parts ad I had up for a long time.
front is on some super stiff 4" lifts . going to be changed out at some point later with tuff country 3-4" hd packs. not sure yet .
she is on 235/85/16 tires on stock rims. I think she looks DEAD SEXY
she is a bit tall at this point but she is missing a lot of WEIGHT . motor/4l80-e/203-205 doubler kit .
You are putting the doubler in a plow truck?
Martin
Martin
yep ...... 
had the parts minus doubler kit .
so if I sold off the few adaptors I have and some extra parts I have money left over after buying the doubler kit with triple stick shifters from a member on pirate that sold it for less than new and it was still in the box new .
so I said why the heck not . road legal farm tractor now
little teeser today showed up .
1 for new truck .
1 for old truck .
saved 200 each on a ebay find .
1 for new truck .
1 for old truck .
saved 200 each on a ebay find .
Nice! I had one in my last Burb in a 14 bolt SF, worked like a champ
so cleaning up the shop a little Saturday and tossed the transfercase together for this . . . . see if you spot the change I did on the setup from regular . . . I read a guys thread on another site and LOVED his idea so I did it to mine .
still need to drop the tranny off and have the tail shaft swapped over to 4wd .
and my buddy texted me and said he might be ready to sell the motor to me I want for this big ol girl .
still need to drop the tranny off and have the tail shaft swapped over to 4wd .
and my buddy texted me and said he might be ready to sell the motor to me I want for this big ol girl .
got the trans back today from the shop . now a 4wd tail shaft . also confirmed it was full reman just never installed yet . ready to bolt up to the doubler setup and then a 454 for test fit / mockup in truck frame . still waiting for my 8.1 to show up for me to buy .. . .
Looking good!
wow 
what a combo hanging in the air .
then back on the bench . after the pan swap over .
what a combo hanging in the air .then back on the bench . after the pan swap over .
Beast! you are going to have over $150 in fluids to fill that combo
stop it . . . . the engine and axle's still need there juice also .
You are going to get carpal tunnel from unscrewing all those caps
naa I already got that from something else 
naa I already got that from something else
Such as...?
you asked
![wackit[1].gif](https://ck5.com/forums/data/attachments/195/195229-4485fc02be9ab6401d9e53d5c72b76c4.jpg "wackit[1].gif")
fyi to those trying this . you WILL NOT fit a energy suspension 85-up tranny/tcase mount up in the gap from the 4l80 to 203 range box . and even worse with mag-hytec pan on 4l80 .
Yeah, I guess I am trolling tonight. 
fyi the monkey is better viewed in dark ck5 mode.
FYI your snazzy cover on your doubler is upside down...
