CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

ReTonkulous

Utlilmaster P30
I have a saved cart at bolt depot going. Swapping a lot of the seen bolts to stainless button head allen. And doing matched bolts for same parts. There are so any miss matched bolts, it is stupid.
 
I have a saved cart at bolt depot going. Swapping a lot of the seen bolts to stainless button head allen. And doing matched bolts for same parts. There are so any miss matched bolts, it is stupid.

You probably know this Wade, but be careful which bolts, most 18-8 or 316 stainless is only 70 ksi strength. Whereas a Grade 5 or 8 can be 120 or 150 ksi. I do what you are doing often, but only with non critical fasteners.
 
Everything is unhooked for removal. Denied. Being a COE, the engine hoist will not get under the cab. I will have to turn the hole thing around and use the forklift.
 
This worked great. Until it didn't. The vise grips were not enough to pull it up hill. The forklift head light blew out when I pulled the switch, so I did not see it fail, until it did. Blocked the tires are closed the shop. 34* outside.PXL_20240218_234433584.jpgPXL_20240218_234438600.jpg

Planned to use it with the bumper on the frame. Pulled it to make access easier.
 
Top Bottom