ReTonkulous

[ktmoutfront]

bet a bulb element is shorted, or in backwards

All LED throughout.

My 1st guess would be hazards are on, (button bumped during all of the work) but the hazard flasher is not functioning. I have seen the headlight switch do that, but I thought that the turn signals still worked. I can't remember, it was too many years ago. And I don't know why it did it.
Just my 2 guesses...

Very cool to see the pay-off on all of your work!!

Hazards? What are those?

 

[6872xtc]

I am assuming that is a joke.

Am I supposed to call them the 4 way flashers?

 

[Big Ray]

All LED throughout.


Hazards? What are those?

Are you using led rated flashers?
The require lower voltage to work, leds don't draw enough amperage for regular flashers.

 

[ktmoutfront]

No, I don't have hazards yet. Everything else was working 2 weeks ago. I added a couple of features under the dash before the tune. Something is not bueno.

 

[Chickntrk]

My guess is bad ground on the turn signal circuit and when the brake is applied it’s back feeding….gotta remember brake and turn signal share a common power back to the light so if the brake lights are working and the turn signals aren’t it has to be on the turn signal side.

 

[ktmoutfront]

Yep. That's where I was planning to head when I dive into it.

 

[ktmoutfront]

Hmm.

Facebook

www.facebook.com

 

[Bent77]

Rob said it’s still available

 

[ktmoutfront]

Don't ask him that. He might think it is worth something.

 

[Capt Ron]

Hmm.

Facebook

www.facebook.com

I have a 2002 Express van frame under my 57.
They are quite a bit wider then older C/P-30s. I can get some measurements tomorrow if you like.

 

[Bent77]

Don't ask him that. He might think it is worth something.

I’ll call again tomorrow…

 

[ktmoutfront]

I have a 2002 Express van frame under my 57.
They are quite a bit wider then older C/P-30s. I can get some measurements tomorrow if you like.

That would be appreciated.

 

[Capt Ron]

Measured at front frame horns, right behind cab and extreme rear of frame.

 

[folkenheath]

I may have done something stupid. Speedometer is 5mph slow. So 55 is 60. 0 - 60 in under 7 seconds. Lifts the front of the truck as it accelerates.

This truck has no bussiness doing this. Suspension has to be upgraded. The MAW process has officially been instituted.

The truck topped out at 65 MPH on the freeway before. I had to get on the brakes at the fwy end of the on ramp, with 1/2 throttle. I was doing 70mph with very light throttle on the way home.

I hated the exhaust note before I took it to the tuner. Now it drives nice and quiet, until I get on it. They know it is coming.

That's awesome Wade! Glad it's finally running like it's supposed to!

What does that thing weigh with the aluminum body and aluminum block the way it sits now?

You need some big wide prostreet style meats on the back to complete the look and hook too.

 

[ktmoutfront]

Measured at front frame horns, right behind cab and extreme rear of frame.

View attachment 486371

View attachment 486372

View attachment 486373

I am at 28" at the front, 36" at the back of the cab to the rear.

 

[ktmoutfront]

That's awesome Wade! Glad it's finally running like it's supposed to!

What does that thing weigh with the aluminum body and aluminum block the way it sits now?

You need some big wide prostreet style meats on the back to complete the look and hook too.

It was 5500 pounds before. I will run it up to the scale one day this week.

Been looking at wheels and tires. It is already tub'd.

 

[ktmoutfront]

Found the blinker issue. The flasher button was pushed in, hence all of the lights including the dash indicators coming on. The Grote 44891 LED flasher has died.

 

[Chickntrk]

Can’t have nothing nice

 

[sweetk30]

Hot rod . .. needs flame tread .

 

[shady]

....