LOTS of pics! Will you be doing the rear section too? Is this truck getting the thru or in front of the dash "A" pillars?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Roll cage kits Updated: last install video uploaded
- Thread starter cybrfire
- Start date
LOTS of pics! Will you be doing the rear section too? Is this truck getting the thru or in front of the dash "A" pillars?
newbie79
1/2 ton status
How similar is that to the 72 body style
I'd be happy to lend you my 72 when you're ready to tackle to first gen cage. For R&D of course
Kert, since the 75 is a full top truck will you be making the cage slightly taller? Or do you plan for the front section to be the same as half top K5's?
I'd be happy to lend you my 72 when you're ready to tackle to first gen cage. For R&D of course
NOW we're talkin!! Way to take one for the 1st gen crew Sean!
Last edited:
Need some pics. Need a cage for my 75 k5 also.
Front section will still be the same. We're really close to the roof as it is. I don't think we can go up much if any at all and the real catch is, as we go up we'd also have to go in which puts it to close to your head.
NOW we're talkin!! Way to take one for the 1st gen crew Sean!
I figured it was the noble thing to do. Just looking out!!!
stoked to see this. My Abomb should be here this week. Got my diff covers and rear shock in boarding kit from DIY. Looking forward to seeing more info on the cage!
I would really like to see more pics of blazer cages
I will get some pics as soon as I start putting it in!
Must have it in hand. Looking forward to a bunch of pics!
Kit showed up today! Installation will follow in the weeks to come!
Kert- I'm going to presume the large tabs in the bag are for attaching the main hoop to the box side, similar to how the factory bar did? And is there any thing I need to know that might be different then three other kits?
Kert- I'm going to presume the large tabs in the bag are for attaching the main hoop to the box side, similar to how the factory bar did? And is there any thing I need to know that might be different then three other kits?
Does this cover the rear seat also? I'm trying to assemble those pieces in my head but I can't place everything.
Yes, well kinda, I asked him to make me a second main hoop, and am going to make a custom "family" cage with an idea in my head, we'll see how well it works. so the extra pieces are for the rear main hoop.
The large ones in the bag are for attaching the b-pillar tube to the b-pillar of the truck via the factor shoulder harness bolt hole.
The two that are far left in your picture are for the a pillar floor connection and the other 4 are for the b pillar floor connection.
Oh ok, that makes sense. I couldn't find the rear halo pieces in the pic and it was driving me crazy trying to figure it out. LOL
