Kain
3/4 ton status
iac is at 8
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Start work on my efi install
- Thread starter Kain
- Start date
Mine did this for the first week or so and i did reset the unit once or twice but now drives just fine. I haven't adjusted the settings for the "bog" from decel to accelerate, it just learned enough to smooth it out. Its still not perfect and some fine tuning could make it better.
Awesome to see another system up and running.
Awesome to see another system up and running.
Kain
3/4 ton status
ya ,I only have 50 miles on it i figure before i change to much i would drive it
jctburbank
Newbie
- Joined
- Jun 7, 2017
- Posts
- 1
- Reaction score
- 1
Did a FITECH Go Street on my 88 Sub 454. Love it.
how much better than the carb setup ? make that 454 feel like a newer motor ?
i have a holley sniper for my 454 just got to finish mockup and fab then its going on . also full roller conversion in 454 . .
Kain
3/4 ton status
i am going to try and mount the hand held control module(whatever you call the darn thing) in side the ash try and im thinking of using one of these things in the link below. what do you guys think?
http://www.ebay.com/itm/Magnetic-Ce...b949dd9fefdadc01255432&pid=100508&rk=1&rkt=1&
http://www.ebay.com/itm/Magnetic-Ce...b949dd9fefdadc01255432&pid=100508&rk=1&rkt=1&
Velcro
Kain
3/4 ton status
I just happen to have industrial strength Velcro, I will see if that will work
Kain
3/4 ton status
I had to cut some of the steel away so the cords won't hit and rub a hole in em
But I like it there.
But I like it there.
mine is a little flatter so the cables don't rub. Plus I have a truck and I'm tall so I can see it better when it's flatter.
ekajkrats
1/2 ton status
Slightly different because I have a 72 but the viewing angles on the fitech suck. I have it in the ash tray and and even hinged mine, but really need to angle it towards the driver to make it worth it, imho.
Kain
3/4 ton status
i can red mine with a glance and can see it well enough im going to leave it there.
i left enough cord behind it if i need to play with it i dont have to lean over i can just pull it out
i left enough cord behind it if i need to play with it i dont have to lean over i can just pull it out
We've been struggling trying to find a place on my buddies 72 as well. It needs to be visible when driving but somewhat hidden since the top is off all summer.
Can these things data output be recorded via phone or laptop? I know everyone loves their gauges, but realistically they are somewhat meaningless until you need troubleshooting, and trying to watch various gauges while you are driving is difficult and unsafe. Not that I'm a safety nut, just that I've tried doing it, and find saving the data and reviewing it afterwards to be more productive and easier.
yes you can datalog
Kain
3/4 ton status
I dont know, that would be a question for fitech, and you would have better luck asking through email unless you like being on hold for 2 hours.
Kain
3/4 ton status
i have seen people cut the dash and mount in it.
it's a pretty nice first gen, definitely not cutting the dash.
Kain
3/4 ton status
no i wouldn't either, can you post a pic of the dash?
Latest Posts
-
Crews and worthy rigs Around the country- Latest: fourwheelerjeff
-
-
