The Bent77 K10 now tow pig

[wetoolowdingbangow]

Yeah the weather is nice over here. Looks like you'll get colder then a witches tit in a brass bra putting that shock on. I had no rear shocks for a while. Shaking ass isn't that fun.

 

[Bent77]

mid 70's here today

but I'm stuck in my office behind a desk.....

By office I'm sure you mean the 3rd stall on the left...

 

[Bent77]

Going to clean up the fuel injection harness, assemble the front shafts, check to see what parts I might be missing for the next round

 

[skunked]

By office I'm sure you mean the 3rd stall on the left...

that's my other office.

 

[wetoolowdingbangow]

Going to clean up the fuel injection harness, assemble the front shafts, check to see what parts I might be missing for the next round

What fuel injection is that?

 

[Bent77]

What fuel injection is that?

I've been procuring TBI components and already have the chip to go with the cam and heads

 

[wetoolowdingbangow]

I've been procuring TBI components and already have the chip to go with the cam and heads

Ah yes that's right. What cam and heads?

 

[Bent77]

Edelbrock performer, which isn't to rowdy, but doesn't play nice with factory tuning

Heads are 461x, closed chamber 327 heads with all the upgrades already done

 

[Truckman4life]

View attachment 201141
Not sure if that other shock is getting done today

13" already, 7" in the last 5 hrs

That sucks. It's not bad here in beautiful Moab.

 

[Bent77]

I have many hateful things to say to you right now




But have fun anyway

 

[wetoolowdingbangow]

Edelbrock performer, which isn't to rowdy, but doesn't play nice with factory tuning

Heads are 461x, closed chamber 327 heads with all the upgrades already done

I have stock heads but I got a edelbrock performer intake for free and I'm thinking I'll do a comp cams xtreme 4x4 cam. Basically an rv cam.

 

[Bent77]

I have stock heads but I got a edelbrock performer intake for free and I'm thinking I'll do a comp cams xtreme 4x4 cam. Basically an rv cam.

Which lift/duration?

 

[wetoolowdingbangow]

Which lift/duration?

Its 206/214 and .432/.453 lift.

 

[Bent77]

Its 206/214 and .432/.453 lift.

Very close to the same specs as mine, which works very well. Just keep an eye on the studs if they are the press in. Shouldn't be too much

 

[6872xtc]

You need a space like this...

Without the mess...

 

[Bent77]

Dude, wax the blue one already!










Oh, and that one was build in a dirt driveway. Know what a biotch it is slinging a 14FF in the rocks?

 

[6872xtc]

Uhhh, I think so??? But did auto correct change that?

And my wife says that 'bruiser's' zen would not be okay with that!

LMAO!

 

[Bent77]

Darn auto-Reject


I did wax it, once

 

[F.S.F.W]

Did the snow melt enough for you to get your other shock taken care of? Haha

 

[Bent77]

Ugh, rivers running down the driveway.
Did flex it back and forth to get drive line measurements