Must be the later years that got the side bolts.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Gangsta!
Looking good
That's cool.
Greg
Greg
It's crazy we almost have the same ideas for our trucks, you are just beating me to the punch. I'm going to have to scope out your truck..
Gotta love child labor
- Joined
- Mar 3, 2000
- Posts
- 9,126
- Reaction score
- 7,090
Good last minute additions!!
Is that a OBD port below the tray?
Yes, it was in the ash tray until this morning
Right now welding up the knuckle stops. At some point bottomed out both axle shafts on themselves...
Helps if I read it has been converted to tbi
Kilted the power steering hose I replaced 6 months ago.
Was pushing fluid around the crimped fittings on both ends.
I have deduced with my awesome logic system that the pressure was not high enough to force the rubber up against the fittings hard enough.
So I turned the pump up more and replaced the hose (from a different store this time)
Was pushing fluid around the crimped fittings on both ends.
I have deduced with my awesome logic system that the pressure was not high enough to force the rubber up against the fittings hard enough.
So I turned the pump up more and replaced the hose (from a different store this time)
