Didn't realize it was your birthday, happy birthday Mark! Hope the new parts treat ya well!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
I did it old school. Kinda neat tool though, with the gear splits already populated.
I might grind the rails. Going to go through each section, reseal, bearing, and paint each before assembly. Likely install in the spring.
Happy B-day!
- Joined
- Mar 3, 2000
- Posts
- 9,126
- Reaction score
- 7,090
Happy Birthday,
I'm almost always here where the tcase is during the workday. Weekends right now I'm not around the shop as much.
get your self a tube of trans goo like I posted pic of in doubler build thread .
makes the job so much faster.
and redrill of the 203 is easy to do . I prefer empty case so no junk in bearings . but lots do it with out . and I did the drill/tap drain plug on my second build for the 203 range box.
makes the job so much faster.
and redrill of the 203 is easy to do . I prefer empty case so no junk in bearings . but lots do it with out . and I did the drill/tap drain plug on my second build for the 203 range box.
Cool, I was going to peruse your thread again anyway, so I'll pay attention.
Definitely doing the 203 work empty case. Since it's getting new stuff in it anyway.
Excited to have all the new parts, but in no hurry to get it together. I have time.
Even going to paint it... @6872xtc
there both easy to play with . and the threads / pics / info / step by step I have done you should have NO problem .
just a fyi on the lower pin for the 203 range box its a 1 way in/out pin . read the thread . . . . .
just a fyi on the lower pin for the 203 range box its a 1 way in/out pin . read the thread . . . . .
Was just doing that. Very nice write up, thank you for the effort you put into making that a resourcethere both easy to play with . and the threads / pics / info / step by step I have done you should have NO problem .
just a fyi on the lower pin for the 203 range box its a 1 way in/out pin . read the thread . . . . .
nice to have the trans and t-cases available to build as an assembly while the truck is still running.
The 3rd pedal? Yes.....
Happy?
Free cheap shot
That was T'd up so well I thought it was a trap.
It might be...
Figured as much.
