CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Blazer Bash prep in full swing
Haven’t even got to that. But mostly it’s functional once I get it back together
Did you tub it at all?
Now's the time to make room for 40's
Send me your credit card
I'm just sayin' 
I have some used sawzall blades with s little life left to donate.And I’m just sayin, I take donations
Well
Today after doing a donut run in the 69, went and cleaned the shop of the glut of parts I got out of Grandpa Bent's garage
Then started on finishing getting this put back together.
Bolted the bed down
moved the hoist
put drag slicks and the bumper in the back
Went to pull the tail lights in. That's when I realized the dummy who did the fabrication work forgot to provision access for the harness to come into the tail light pocket
Today after doing a donut run in the 69, went and cleaned the shop of the glut of parts I got out of Grandpa Bent's garage
Then started on finishing getting this put back together.
Bolted the bed down
moved the hoist
put drag slicks and the bumper in the back
Went to pull the tail lights in. That's when I realized the dummy who did the fabrication work forgot to provision access for the harness to come into the tail light pocket
I hate when that happens!Well
Today after doing a donut run in the 69, went and cleaned the shop of the glut of parts I got out of Grandpa Bent's garage
Then started on finishing getting this put back together.
Bolted the bed down
moved the hoist
put drag slicks and the bumper in the back
Went to pull the tail lights in. That's when I realized the dummy who did the fabrication work forgot to provision access for the harness to come into the tail light pocket
FFS
So I don't have a plasma
My oxy bottle is empty and my torch handle has something way wonky in it
My buddy has a good oxy bottle and torch handle. Might have a lunch/cylinder barter opportunity next week
I have a plasma cutter , grab some Cheetos and stop by.
Step drill bit don’t fit?
Need a 2” hole. Don’t wanna cut the harness
Can only drill from the bottom
Might have to bribe my buddy with the torch. He sent me this picture
Hole saw?
It’s 3/16” plate
