- Joined
- Mar 3, 2000
- Posts
- 9,189
- Reaction score
- 7,272
Ordered the stuff to fix my carnage from blazer bash and take it back to 4 wheel drive instead of 3. Got it from ORD.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
B
Bent77
Guest
D60 in bound?
- Joined
- Mar 3, 2000
- Posts
- 9,189
- Reaction score
- 7,272
Well I am in the market for 1, but right now just fixing the axle shaft. When a decent priced 60 is located I will sell the 10 bolt. I know needle in a haystack.
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
what's a good price?
- Joined
- Mar 3, 2000
- Posts
- 9,189
- Reaction score
- 7,272
That price wouldn't be bad. I would like to get one that is already 4.10 geared, preferably with a locker, but I could re-gear if needed.
I don't know if I should stick with GM, or if certain year Fords will bolt up, if dually axles are different.
I don't know if I should stick with GM, or if certain year Fords will bolt up, if dually axles are different.
Ford would be the wrong drop. Dodge would work. that axle in Wichita Falls is a couple of hours away from me. I could pick it up if needed and meet in Co. Springs if need be. I will keep an eye out.
Dodge axle to GM kit: https://www.offroaddesign.com/dodge...s-washers-for-most-aftermarket-springs-1.html
That's a smoking deal. On the west coast that'll be $1,500 to $3,000
Looks like someone robbed the single wheel parts and sold the rest, still worth the $300
- Joined
- Mar 3, 2000
- Posts
- 9,189
- Reaction score
- 7,272
Driving to work today and heard a loud bang, stopped at a pullout and notice this...
Drove the mile back home and grabbed a different ride for the day.
Drove the mile back home and grabbed a different ride for the day.
Time to go double shear on that carrier
That's impressive!
- Joined
- Mar 3, 2000
- Posts
- 9,189
- Reaction score
- 7,272
I don't feel bad that it broke, it's had a 37 on it since 2006 and may have backed into a thing or 3.
- Joined
- Mar 3, 2000
- Posts
- 9,189
- Reaction score
- 7,272
Fixed the tire carrier today, or watched someone else do it. New axle put in the bumper for the carrier to rotate on. Now just a little paint touch up and put the tire back on.
Last edited:
- Joined
- Mar 3, 2000
- Posts
- 9,189
- Reaction score
- 7,272
Back like it should be, just need to prime and paint.
You need to take it over a jump to prove that it is good.
- Joined
- Mar 3, 2000
- Posts
- 9,189
- Reaction score
- 7,272
Finally fixed carnage from Blazer Bash last year. Put new passenger front axle shaft in, replaced and repacked bearings new seals etc. Also found they didn't take balancing weights off one rim when I got tires last time, so took those off, since I run balancing beads.
When I did the beads on the crew cab they only took the weights off 2 of the wheels. 
Now you're ready to hit the trails with the Circus!
Now you're ready to hit the trails with the Circus!
- Joined
- Mar 3, 2000
- Posts
- 9,189
- Reaction score
- 7,272
The patient has been moved into the outdoor operating room. Pre-procedure vitals check showed 4 neutrals 1 reverse and park. Pre-op begins shortly to prep for the transplant. Hopefully the doubler won't require any internal work.
- Joined
- Mar 3, 2000
- Posts
- 9,189
- Reaction score
- 7,272
Doubler is out and on the ground, splines look good, operates as it should. No injuries to report.
