- Joined
- Mar 12, 2004
- Posts
- 2,647
- Reaction score
- 1,043
Tried to make something from some crap footage. My Blazer,friends toyota and PBLAZE's Blazer
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
The Go Fast Smooth Ride Side Video Thread
- Thread starter sponsoredbydad
- Start date
Neat stuff. Looked good to me.
Hope this is allowed here, and I hope you guys like the song 
Last edited by a moderator:
- Joined
- Mar 12, 2004
- Posts
- 2,647
- Reaction score
- 1,043
Of coarse it's allowed, silly
Where is that mounted?
Where is that mounted?
On my anti wrap bar crossmember.
I bought the tube mount mostly for using on the rock bouncher, but low and behold i found some tube on the blazer lol.
Hope this is allowed here, and I hope you guys like the song
awesome point of view! your transfer case looks like it's moving around a lot though. makes me wonder what mine looks like while driving.
Last edited by a moderator:
Im really bummed that everyones reaction is exactly the same
When i took the vid i was like "man, this will be a sick angle!" Then i watched it and all i could look at was the tcase
I just put the mount in this summer, ill check motor mounts next i guess. But to be honest, ive never seen a video of one at this angle, so it may not be that uncommon
Im really bummed that everyones reaction is exactly the same
When i took the vid i was like "man, this will be a sick angle!" Then i watched it and all i could look at was the tcase
I just put the mount in this summer, ill check motor mounts next i guess. But to be honest, ive never seen a video of one at this angle, so it may not be that uncommon
neither have i, makes me wonder. i've got competition motor mounts and a poly trans/case mount. from under he truck i cannot get he t-case to move by hand. but i have no idea what happens when driving...
Mines all rubber. Thinking of doing some of kerts or tnas poly motor mounts.
i really like them. ive heard complaints about how much vibration they transfer into the body/frame but i haven't noticed much. it just feels solid.
- Joined
- Mar 12, 2004
- Posts
- 2,647
- Reaction score
- 1,043
I will try to film that same POV Halloween wknd. I have poly motor mounts and rubber Trans and T-case. Heck I did not even see the TC I was watching the bump stops and springs
Blown motor mount is the culprit.
Should switch them all to rubber or all to poly but not a mix. Puts extra strain on the drivetrain when the poly wants to stay stiff and the rubber is wiggling around.
Im pretty sure it's only bad if the tranny mount is more stiff than the motor mounts. Softer trans mount won't hurt the trans. Switch it around though and I forsee cracked trans cases.
There might be some truth to that but the whole drivetrain is one unit. What affects one end will surely transfer through.
I wouldn't mix. Doesn't matter what you run but run the same throughout.
I agree with "dude", won't hurt a thing to run rubber on the trans and poly on the engine mounts. It's safe to run softer on the trans, but never stiffer, than the engine mounts.
- Joined
- Mar 12, 2004
- Posts
- 2,647
- Reaction score
- 1,043
Couple of weekends ago. Cruise in the dunes and a run up comp hill after a short meet and greet at the north pole
Last edited:
Glamis right? Never been to Dumont but I think Dumont is smaller and the sand is "dirtier". Hmmm, end of the video has me confused now.
