CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
The R/C Garage... [R/C Drivers Lounge]
- Thread starter TheBeast_88K5
- Start date
Got some new wheels....
I bought the wrong length front driveshaft so I had to shorten the links on the front axle so it looks like crap at the moment....
I bought the wrong length front driveshaft so I had to shorten the links on the front axle so it looks like crap at the moment....
79rustyk10
3/4 ton status
What wheels are those? 2.2s?
I've got the pro line 1.9 TSL'S. They seem to work pretty good so far, but my crappy losi bead locks won't hold a bead for anything. I guess that's what I get for being cheap.
I've got the pro line 1.9 TSL'S. They seem to work pretty good so far, but my crappy losi bead locks won't hold a bead for anything. I guess that's what I get for being cheap.
They are rc4wd oem steel beadlock wheels, they are 2.2's. They have a few different sets of wheels like these.
http://store.rc4wd.com/
Ive ran the axial plastic wheels for along time and decide to pick up these the other day.
http://store.rc4wd.com/
Ive ran the axial plastic wheels for along time and decide to pick up these the other day.
ion
1/2 ton status
At Crawl For A Cure 2013. 
never ends...
working on another..
Body: custom vacuum mold i got from an ebay auction
trans: Losi Trekker
motor: 80t gbent predator but have a 34t 130 can I may try
axles: Redcat Sumo - faster geared than losi trekker and handle speed better
links: all thread custom
shocks: trekker stock - making front soft and rear stiff
tires: boggers
rims: stock with danally pvc mod
beadlock rings: fungi custom
esc/rx: Redcat sumo - for 4ws!!!!
tx: Redcat Sumo
most of the parts
shooting for 6.5" wheel base... (that is what she said
)
need an updated pic with shocks in front.. need more shocks for rear... and put guts in and drive..
and when this one is done... i got another I got most of the parts for!!!!!
i bought this model from ebay...
but this will be done most likely after xmas... or maybe not as im impaient!!!!!!!
working on another..
Body: custom vacuum mold i got from an ebay auction
trans: Losi Trekker
motor: 80t gbent predator but have a 34t 130 can I may try
axles: Redcat Sumo - faster geared than losi trekker and handle speed better
links: all thread custom
shocks: trekker stock - making front soft and rear stiff
tires: boggers
rims: stock with danally pvc mod
beadlock rings: fungi custom
esc/rx: Redcat sumo - for 4ws!!!!
tx: Redcat Sumo
most of the parts
shooting for 6.5" wheel base... (that is what she said
)
need an updated pic with shocks in front.. need more shocks for rear... and put guts in and drive..
and when this one is done... i got another I got most of the parts for!!!!!
i bought this model from ebay...
but this will be done most likely after xmas... or maybe not as im impaient!!!!!!!
My crawler is for sale, again. Axial XR10, X-trail chassis, Flysky GT3B radio, i have some extra stuff, PM me for info.
It may not be a crawler or truck even but its still a blast to drive!
Its a 4ft enforcer hull with. 27cc water cooled Rcmk 2 stroke motor that puts out about 5.75hp. It'll do about 35-40 but I got adjust trim tabs cuz it pulls to the right and when I left off the rudder it really starts screaming. And I only have drove it at 7000ft elevation since I had prop sharpened and balanced and went to a single rudder instead of dual. Before that it would only do 30-35mph but was a lot easier to handle.
Its a 4ft enforcer hull with. 27cc water cooled Rcmk 2 stroke motor that puts out about 5.75hp. It'll do about 35-40 but I got adjust trim tabs cuz it pulls to the right and when I left off the rudder it really starts screaming. And I only have drove it at 7000ft elevation since I had prop sharpened and balanced and went to a single rudder instead of dual. Before that it would only do 30-35mph but was a lot easier to handle.
This is how it was when I first bought it. Had a home lite 25cc motor with dual rudders
never ends...
working on another..
Body: custom vacuum mold i got from an ebay auction
trans: Losi Trekker
motor: 80t gbent predator but have a 34t 130 can I may try
axles: Redcat Sumo - faster geared than losi trekker and handle speed better
links: all thread custom
shocks: trekker stock - making front soft and rear stiff
tires: boggers
rims: stock with danally pvc mod
beadlock rings: fungi custom
esc/rx: Redcat sumo - for 4ws!!!!
tx: Redcat Sumo
most of the parts
shooting for 6.5" wheel base... (that is what she said
need an updated pic with shocks in front.. need more shocks for rear... and put guts in and drive..
and when this one is done... i got another I got most of the parts for!!!!!
i bought this model from ebay...
but this will be done most likely after xmas... or maybe not as im impaient!!!!!!!
Plans for the deck truck?!!
Did a lil fall crawlin couple weeks back
And.......
Whoa now, i cant believe the selection of parts now days. I never was really into it big time, just some junk my nephew and i would play with years ago. But this new stuff is friggin awesome!
Plans for the deck truck?!!
well i want to put micro axles under it.. so then it will be 4wd... but keep the tires that are on it... will turn wide but dont care.. make it a "recovery" vehicle.
If I get to it.. Wild Blue is first... but working on house so no time recently.
but plans... i have to redo the deck as it isnt wide enough... then try and figure out how to get it to actually work... can be done... i have seen a 1/10 that worked...
then im procrastinating... I may want to buy a peterbuilt and just do a rig... instead and hold the deck truck for a bit.. i dunno...
ughhhhh redoing basement first... so will c in the future...
Sounds sweet
79rustyk10
3/4 ton status
Just ordered the mamba max pro sct 2400 kv setup for my slash. I was disappointed with the traxxas brushless setup so that went into my car.
Figure it's gonna be overkill, but overkill is best. Should be fun on 3s.
Figure it's gonna be overkill, but overkill is best. Should be fun on 3s.
Still have my crawler for sale
Evidently, my last PM did not get to you.
PM me infor and pricing please...
My update, got pro line paddle tires, c10 body painted, new body mounts enroute.
Picked up a like new stAmpede 4x4, duratrax motor/esc, lipo charger/2s 60c lipo
I've gotta stay off eBay
On the other Hand, I'm pumped to try lipo batteries
Picked up a like new stAmpede 4x4, duratrax motor/esc, lipo charger/2s 60c lipo
I've gotta stay off eBay
On the other Hand, I'm pumped to try lipo batteries
My update, got pro line paddle tires, c10 body painted, new body mounts enroute.
Picked up a like new stAmpede 4x4, duratrax motor/esc, lipo charger/2s 60c lipo
I've gotta stay off eBay
On the other Hand, I'm pumped to try lipo batteries
Just got my first ever RC that wasn't the $14 ones from Walmart lol.
In addition to the truck I ordered up
Titanium links
New spur and pinion
All axle aluminum
Extra set of beadlocks
TSL's
A couple of 2s & 3s batteries
Castle link & bec
Axial universal axle shafts
Parts are still coming in.
I already dicked with it by removing all the sponsor graphics. Ill probably end up doing the fastback roof line when I do the links. Haven't decided yet on moving the battery box up front or not.
