Xtremegmc80
1/2 ton status
looking better with solid axle under there!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
The "under destruction builds" supersize75k5 's driveway of despair and repair
- Thread starter supersize75k5
- Start date
I don't know how long I will stay , but if your right about nekkid touching each other chicks , I will stop in after work to watch the madness
I could always tune my rig up there instead of home .
There's gonna be chicks there?!
Maybe I should come by and rub my feisty self into one of 'em 
supersize75k5
OrganDonorRacing.com
DANA 60!!!!!!!!
Wound up decideing to move the axel more forward, should work out ok with the steering, I have more areas to trim in the core support and front of the fender than the back of it, figure I could solve the issue before it becomes one..
a tram is a measuring decice between two points. it has quite a few ajustments for hight to raise and lower on a plane and the distance part slides in and out and has provisions for clamping to hold your reading. they are great for use with frame and body work in conjuntion with a map of a cars orginal frame/body specs.
tram... ---> http://www.redhillsupply.com/MOC7651.htm
Wound up decideing to move the axel more forward, should work out ok with the steering, I have more areas to trim in the core support and front of the fender than the back of it, figure I could solve the issue before it becomes one..
a tram is a measuring decice between two points. it has quite a few ajustments for hight to raise and lower on a plane and the distance part slides in and out and has provisions for clamping to hold your reading. they are great for use with frame and body work in conjuntion with a map of a cars orginal frame/body specs.
tram... ---> http://www.redhillsupply.com/MOC7651.htm
Jishory
1/2 ton status
nice
blowedupmotor87
1/2 ton status
Very nice! Great work!
juanblzer
1/2 ton status
i'll cruise by to check out the mad scientist at work I'll call before I head over
I'll call before I head over
supersize75k5
OrganDonorRacing.com
bout time for it to be sitting on all 4s i mean damn what took you so long I saw one of the off road mags use that same kit i believe. now whats it gonna do on the ramp?
I saw one of the off road mags use that same kit i believe. now whats it gonna do on the ramp?
pauly383
Daddy383
Shawn won't use a ramp , a parked car , a stump , a wall , but never a ramp 
lol damn well lets see some flex im curious about the radius arms and coils......
supersize75k5
OrganDonorRacing.com
i think its going to wind up too tall for my taste
looks like bigger tires
looks like bigger tires
so when are you gonna up date your sig??
Man you sure do work fast, Im slow as molasses.
Im slow as molasses.
lookin' good...
gettinwestern
Registered Member
Looks great so far!
supersize75k5
OrganDonorRacing.com
this is so fun,,uh not
for thiose thinking about this..save your self and run, its a beotch!
for thiose thinking about this..save your self and run, its a beotch!
I had one up on a lift at work today and was picturing what kinda mess you were getting in, looks like some good labor involved.
supersize75k5
OrganDonorRacing.com
so tempting just to use the 42's
currently dialing in all the specs, caster, trac bar, and others trying to get it right, then its time to finish weld.
cant wait to change the side badges from 2500hd to 3500hd!
currently dialing in all the specs, caster, trac bar, and others trying to get it right, then its time to finish weld.
cant wait to change the side badges from 2500hd to 3500hd!
pauly383
Daddy383
Me no left house yet , maybe I drive over after a while , don't roll it until I see ya drive it !!
