This was the only time it was mildly beat on that I know of 
View attachment VID_20220409_165741568.mp4
View attachment VID_20220409_165741568.mp4
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
The Wonton
- Thread starter Jonathan L
- Start date
I didn’t see anything that indicated it was beat on either. Some slight scoring on the crank shaft bearings but nothing that my fingernail snagged. One of the cam lobes had a little bit of material that was missing off the top of the lobe so maybe that had something to do with it? Hard telling. You could see on the top of the piston where it had just barely knicked the corner of the valve indentation, but there was no other signs of damage....
Wonder what would/could have bent a valve.?
Ran good. And didn't appear to be beat on lol.
....
Wonder what would/could have bent a valve.?
Ran good. And didn't appear to be beat on lol.
Jon mentioned to me yesterday evening that the oil pickup tube was spot welded to the oil pump. I don't think that was ever done at the factory? Possibly someone has been into it before or maybe the shortblock was replaced under warranty or something. We'll probably never know, lol.
Progress pictures! I need to paint the heads still, but everything is on except intake and carb.
Mmmmmmmm these are my favorite pictures…
New block is in! Hoping to make some noise with it soon 
I bypassed the oil cooler lines for the sake of getting it done before squarebody nationals at the end of the month, but this winter I’ll take some time and get it all put together......
I still have a sub box built to go behind the seat of that thing. Designed for 'Alpine R' slim line 10"s .
I'll throw it in the pile of van parts @USSkoval is going to pick up at my place some year if I ever make said pile lol.
If you want it anyway. It's only taking up space on a shelf, and I'll never put it in my crew.
(PS,... You should buy that one too, And just swap bodies
. It's what I planned to do.
Sell the brand new Yokohama 40"s on real beadlocks to get 90% of your money back.
)
Seriously, it's a thought.
Frame is in amazing shape, most of the running gear has been gone through.
Throw some dually hubs on it and go lol.
I'll throw it in the pile of van parts @USSkoval is going to pick up at my place some year if I ever make said pile lol.
If you want it anyway. It's only taking up space on a shelf, and I'll never put it in my crew.
(PS,... You should buy that one too, And just swap bodies
. It's what I planned to do.Sell the brand new Yokohama 40"s on real beadlocks to get 90% of your money back.
)Seriously, it's a thought.
Frame is in amazing shape, most of the running gear has been gone through.
Throw some dually hubs on it and go lol.
What heads are you using?
I’m using the factory gen 6 heads
So close I can taste it! Need to finish plumbing up the fuel pump and regulator, wire it in, reinstall the distributor/plug wires and should be able to fire off and see if I knew that I was doing or not lol
Badass!
Nice truck and upgrades, I dig the big block! I like the upgrades too, cam, intake, headers, carb, nice bang for the buck.
Though with the typos you got me curious, is it this cam?
What trans/converter and gears you running?
Nice truck and upgrades, I dig the big block! I like the upgrades too, cam, intake, headers, carb, nice bang for the buck.
Though with the typos you got me curious, is it this cam?
What trans/converter and gears you running?
View attachment 531736
Here’s my cam and specs! My truck has an SM465 trans, stock gearing stock 4.10 rear
Nope all the same
Yeah those mods will definitely wake it up. 
