DickeysK5
1/2 ton status
WOOOOOWWWW!!!!!!!! Jack, Bad A$$. Nice job, it looks mean. Lets do this
When you showed up with your new rig last year, I knew I had to get going on the upgrades
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
What do you need to do for BB12?
- Thread starter Bent77
- Start date
When you showed up with your new rig last year, I knew I had to get going on the upgrades
dustin.dstroya.montoya
1/2 ton status
When you showed up with your new rig last year, I knew I had to get going on the upgrades
I like yours more
Nice that has come a long way since I saw it a couple years ago. I hope I can make it out there this year to see it again
DickeysK5
1/2 ton status
The pictures were when it was finished this winter. The paint doesn't look the same now!
When did this turn into the "what Jack has done" thread?
I just gotta make sure my phone is charged...
So i can get on here and look at all the pics of you guys having fun at BB
So i can get on here and look at all the pics of you guys having fun at BB
Cuz you dont post pictures...
Don't have any.
DickeysK5
1/2 ton status
Yup, got four moderate/hard runs done. May try to get one or two in before heading to Moab.
Man, the poor General is going to get left in the dust. I'm still carb'd running an NP241...
Just noticed I need to build a right front lower link. Could not figure out why the steering wheel was off 90 degrees. Wheeler Lake trip last weekend did it in. Hit a rock with the right front. Bent the bead lock and bent the link. Oh well.
TDAWG1
1/2 ton status
Steering system Hydro assist, Anyone coming from TX
D60 Build SLOW go
Tires At least one could use some help if anyone has a 37" BFG to get rid of
Cage NIce wish
Engine Wireing OUCH
Exhaust UHHHHH HElp
CB R&R
test PFFFFT
Clean PFFFT
MONEY anyone have some they can share LMBO
Doors Bulid new ones Better ones
Lights Gutted the Old ones/new ones R&R
Winch Repair
Horn
E brake
Tune Up
Guages Oil Pressure and Temp R&R
Pack
Bolts for Front Drive Shaft... Missing
Replace and Up Grade HardWare for Shocks
D60 Build SLOW go
Tires At least one could use some help if anyone has a 37" BFG to get rid of
Cage NIce wish
Engine Wireing OUCH
Exhaust UHHHHH HElp
CB R&R
test PFFFFT
Clean PFFFT
MONEY anyone have some they can share LMBO
Doors Bulid new ones Better ones
Lights Gutted the Old ones/new ones R&R
Winch Repair
Horn
E brake
Tune Up
Guages Oil Pressure and Temp R&R
Pack
Bolts for Front Drive Shaft... Missing
Replace and Up Grade HardWare for Shocks
gonefishin
1/2 ton status
Umm let's see
finish frame swap
Rebuild engine after I found out yesterday I had water sitting in it??????
Divorce lol jk but that would follow me going to bb
$2000 worth of gas
Everything else is ready
finish frame swap
Rebuild engine after I found out yesterday I had water sitting in it??????
Divorce lol jk but that would follow me going to bb
$2000 worth of gas
Everything else is ready
- Joined
- Mar 3, 2000
- Posts
- 9,123
- Reaction score
- 7,077
I need to get off the dang computer and go work on it!!
So things have changed.
New fuel pump in wife's new to her car.
Remove all front sheet metal off of the Jimmy. Pull the engine and all the crap that goes with doing that. Remove engine mounts and cross member. Push the frame back into shape on the right side. Plate the frame front and back of the mounts on both sides to repair the broke frame at the panhard bar mount.. Build new engine mounts. Build new cross member. Then reassemble the whole thing. Did I mention I no longer have a shop or garage. My brother is kind enough to let me use his barn for most of the tear down. Then drag it into his shop for the fabbing.
And finish the semi. I guess I had better get off of here and get to work. Tomorrow.
New fuel pump in wife's new to her car.
Remove all front sheet metal off of the Jimmy. Pull the engine and all the crap that goes with doing that. Remove engine mounts and cross member. Push the frame back into shape on the right side. Plate the frame front and back of the mounts on both sides to repair the broke frame at the panhard bar mount.. Build new engine mounts. Build new cross member. Then reassemble the whole thing. Did I mention I no longer have a shop or garage. My brother is kind enough to let me use his barn for most of the tear down. Then drag it into his shop for the fabbing.
And finish the semi. I guess I had better get off of here and get to work. Tomorrow.
1009krawler
Registered Member
I am coming from texas! looks like the only one at the moment...
Nice long drive
hope i can get my list finished here in the next few weeks
TDAWG1
1/2 ton status
Nice drive carefull and C ya soon.
