WL: 1990 K5 (California to Nebraska on 38" rubber. (WARNING: Lots of Pics))

[80' 427]

The current engine is a stock tbi he trade a case of beer for. Like 150 maybe. I would only come if I got my shocks figured out and at least had the tunnel ram on this 454 or swapped in the camaro 427. The 427 is almost done. The brodixs now flow 395 so hoping for a 9:90 this time.

 

[80' 427]

I mean marty's 350 makes less power than deulings water heater!

 

[folkenheath]

The 427 is almost done. The brodixs now flow 395 so hoping for a 9:90 this time.

Now we're talking, bring it up!

I mean marty's 350 makes less power than deulings water heater!

 

[80' 427]

I was thinking about selling the camaro but had a crazy idea about making it like the Jim Garner Baja 442.

 

[jekquistk5]

The current engine is a stock tbi he trade a case of beer for. Like 150 maybe. I would only come if I got my shocks figured out and at least had the tunnel ram on this 454 or swapped in the camaro 427. The 427 is almost done. The brodixs now flow 395 so hoping for a 9:90 this time.

A stock tbi motor with a little work will make it up no problem. You just have to hold it to the floor till the valves float. The gear split on the 465 will probably kill all momentum though. Ask richz28.

 

[80' 427]

He is lucky if it hits on all 8. Pretty lazy about tuning

 

[82355]

Don't care about horsepower.

Martin

 

[82355]

I actually want to swap in a 350 TPI.

Martin

 

[80' 427]

You complain about lack of power so you must care some.

 

[82355]

Low end torque. Hence wanting the TPI.

Martin

 

[80' 427]

I don't have multiplication so I need power.

 

[folkenheath]

Don't care about horsepower.

Martin

That's like some one saying they don't want to get laid.

I actually want to swap in a 350 TPI.

Martin

You don't care about hp but you want to swap in a little more?

Low end torque. Hence wanting the TPI.

Martin

If you want low end torque buy 80'427s 454 from him so he can put the 427 in his truck!

 

[80' 427]

He has a TBI 454. In fact I gave him a TBI setup for his 396.

 

[folkenheath]

He has a TBI 454. In fact I gave him a TBI setup for his 396.

Why are you talking about swapping in a tuned port SB if you have a 454 Martin?

 

[80' 427]

He breaks stuff now.

 

[82355]

I have lots of 454's.

Martin

 

[pblaze725]

I have lots of 454's.

Martin

I'm jealous.

 

[82355]

I'd like to find a set of black center caps, but these will do for now.



Martin

 

[livid4dirt]

^^^^^^^^^Looks Good! Is there a difference in the newer caps like that between an aluminum factory wheel and a steel wheel? I'm looking for some GMC ones for my Jimmy. And just want to make sure if i find a set they are correct.
Thanks.........

 

[82355]

I'm not sure. These were off a 1991 K3500 with steel wheels.

Martin