What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Media

338 Lapua Mag compared to 308 win(or sort of 7.62×51mm)

338 Lapua Mag compared to 308 win(or sort of 7.62×51mm)

  • 0
  • 0
Another Rem 700 MLR 338 Lapua Mag macmillan A5 Nightforce 5x22x56

Another Rem 700 MLR 338 Lapua Mag macmillan A5 Nightforce 5x22x56

  • 0
  • 0
Pictured with one of my hand built mags for 7 shot capacity

Pictured with one of my hand built mags for 7 shot capacity

  • 0
  • 0
another 338 Lapua Mag remington 700 MLR build...This one for my cousin

another 338 Lapua Mag remington 700 MLR build...This one for my cousin

  • 0
  • 0
way later at barrel # 3 and around 7000 rounds on the action and 300 on this barrel

way later at barrel # 3 and around 7000 rounds on the action and 300 on this barrel

  • 0
  • 0
24" target set at 1350. the shots on the left are one group

24" target set at 1350. the shots on the left are one group

  • 0
  • 0
Yes it shoots. 10 shot group at 100 yards with my most accurate load. Now will it stay stable out long range

Yes it shoots. 10 shot group at 100 yards with my most accurate load. Now will it stay stable out long range

  • 0
  • 0
Finished with my first Ted Galliard barrel build. 30" 1in 10" twist 6 groove. WILL IT SHOOT?

Finished with my first Ted Galliard barrel build. 30" 1in 10" twist 6 groove. WILL IT SHOOT?

  • 0
  • 0
11 degree target crown under my progressive home design muzzle brake

11 degree target crown under my progressive home design muzzle brake

  • 0
  • 0
Next I index the Muzzel Brake blank I've already roughed out...yes those are marks from tightening while rough, I will remove those marks later.

Next I index the Muzzel Brake blank I've already roughed out...yes those are marks from tightening while rough, I will remove those marks later.

  • 0
  • 0
Make sure to disassemble the bolt before test fitting with the chambering tools

Make sure to disassemble the bolt before test fitting with the chambering tools

  • 0
  • 0
Bolt just closes with .001" clearance, a .002" shim on the guage and it wont close. Just right.

Bolt just closes with .001" clearance, a .002" shim on the guage and it wont close. Just right.

  • 0
  • 0
action treaded on to test headspacing on bolt face to go guage

action treaded on to test headspacing on bolt face to go guage

  • 0
  • 0
Dave Tubs 7/16 inch thick pinned recoil lug. Action has already been trued

Dave Tubs 7/16 inch thick pinned recoil lug. Action has already been trued

  • 0
  • 0
Go guage try

Go guage try

  • 0
  • 0
30" Ted Galliard Barrel blank, custom profile for me.

30" Ted Galliard Barrel blank, custom profile for me.

  • 0
  • 0
modified headstock on my 13 72 south bend lathe to center barrels. can only do 26"+ this way, otherwise I use the steady rest

modified headstock on my 13 72 south bend lathe to center barrels. can only do 26"+ this way, otherwise I use the steady rest

  • 0
  • 0
My custom floating reamer holder I built.

My custom floating reamer holder I built.

  • 0
  • 0
chambering with a tactical reamer snug finish

chambering with a tactical reamer snug finish

  • 0
  • 0
My 338 Lapua Mag I built for long range.

My 338 Lapua Mag I built for long range.

  • 0
  • 0
Lever

Lever

  • 0
  • 0
Tcase link

Tcase link

  • 0
  • 0
jjjjjjj

jjjjjjj

  • 0
  • 0
lllll

lllll

  • 0
  • 0
Top Bottom