I have the Alcans off my k5 but they are 52’s
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
(Cough, cough... )
3rd pedal truck..
But even if it was a 700R4, the lock-up convertor better not be a slippin' 10%!
that was for 1 to 1 3spd auto
Well, my a/c job didn’t last. She’s got a leak at the connection on the back of the compressor. The sealing washers don’t seem to be the correct combination with the machined pocket on the compressor. It looked off to me but it held vacuum for hours. It does not hold 300psi. It has been farting freon and oil over the last week.
Yes are several different thickness washer/seals
Compressor should have come with a couple options to use
Compressor should have come with a couple options to use
Correct, and It did. I played with a couple different ones and thought it was good. Apparently not. I bought another Murray assortment and will try again.
I would go grab pictures of my collection compressor seals but am sitting in the pool chilling
They have to stick out above the groove, and be same hight.
No worries. Definitely don’t get out haha
Yeah, not quite the same height. You can see the manifold isnt square to the compressor
Back in business!
Got some new lights to try out.
Aluminum housing, glass lens, 9005 and 9006 halogen bulbs. Gotta be better than the non existent light it has now.
Aluminum housing, glass lens, 9005 and 9006 halogen bulbs. Gotta be better than the non existent light it has now.
With the new headlamps I could actually tell they were on and see the road. But as I figured would be the case, I am spoiled by the leds in everything else I drive. So, put some leds in. The first set I got had a 90* connector and would not clear the metal tabs on the factory buckets. Returned those for a straight style with a short pigtail. Still had to tweak the metal tabs out to clear the heatsinks, but tonight will be the test on the road.
I am interested to see what you find. I saw a set of LED conversions of LMC housings 8+ years ago and the light went way up high on low beam. I didn't need to see the tops of the trees on low beam.
Ill take some pics
Don’t seem to bad on the door. Still daylight though. I’ll get some total darkness ones when we get home later.
Low beam
High beam
Low beam
High beam
I guess I forgot to take night pics. They are definitly bright enough for driving now. They have some weird shadowy spots in the light probably because of the reflector in the low beam housing and the led bulb combo. Still happy overall that I can see at least.
I need to do valve guide seals this fall when the weather is nice.
What’s the best kind to use on this stock tbi engine? @Wes Harden @ZooMad75 @fastazz81 ?
I see a few different types on rock auto
What’s the best kind to use on this stock tbi engine? @Wes Harden @ZooMad75 @fastazz81 ?
I see a few different types on rock auto
Get the factory umbrella style that the later tbi engines used. Last set I got were Fel-Pro.
Like these? Looks like there’s a different part number for intake and exhaust
