lol pew pew
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
2000 GMT400 CREW CAB SFA SWAP-The Warden: Fuel leak fixed and awaiting surgery…
- Thread starter GWeakland620
- Start date
The ultimate goal for this truck is tow duty/family camping trips/small offroad adventures.
lol pew pew
I didn't even hafta open my mouth. Proof that you're just doomed no matter what any one of us does. You are the common link.
Haha maybe sir.
They’re heeeeeere!
It's been a couple hours are they in yet?
No, I fixed the coolant leak and got it fired up.
Springs are next weekend in a heated shop.
Springs are next weekend in a heated shop.
What’s the sport in that?
I did the “working in the cold” thing today. I’m over it already.
I am actually interested to see how much better those are than my Rough Country's.
You have to ride in it. Guess nows a good time to invite Gwee to Blazer Bash
Lol you guys.
It'll have to be 4wd for Blazer bash.
You can cruise for ice cream in it. greg will need a tour guide for Moab anyway
You can ride on the console, with a hand on a knee on each side of you...
Do I need 4wd to get in the parking lot? Asking for a friend.
Oh man I love ice cream!
Doodies.
It’s a bench seat
Had a good maintenance day today on the fleet. Knocked oil changes out on the 3 drivers.
Changed the air filter on the diesel.
Should run much better and maybe even gain a few mpg’s.
Also decided to knock out the over head console.
I read a couple posts and made an educated guess as to where the mounting holes should be. Man did I get lucky.
The front center hole between the visor mounts.
After the holes were cut, it’s as easy as sliding the rear in the slots and tightening a screw on the front.
I’ll wire the lights up the next time I’m working on it.
Changed the air filter on the diesel.
Should run much better and maybe even gain a few mpg’s.
Also decided to knock out the over head console.
I read a couple posts and made an educated guess as to where the mounting holes should be. Man did I get lucky.
The front center hole between the visor mounts.
After the holes were cut, it’s as easy as sliding the rear in the slots and tightening a screw on the front.
I’ll wire the lights up the next time I’m working on it.
This upgrade has already been worth it. I now have a spot for my sunglasses. 
