Run a co2 tank into the sliders and pressure them up to 125ish maybe? Just a thought... And if you try it out it will save me the trouble of setting mine up like this if it doesn't work.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
74 dirty c rough weekend with a smile....
- Thread starter bergerking
- Start date
bergerking
1/2 ton status
headed offshore for a little fishing... will be back Saturday and I will pressurize them and let u no....
Maybe when you get back we can go for a test run..
dammit I wanna be a part of this, I'm not far, but I'm also not ready
Just make sure you are ready for KOH.
bergerking
1/2 ton status
connected both together with 1x1 square and drilled 1/2 hole in both welded it up for test... filled them up to 120 psi and knocked the lugs off my truck... with the sliders @ 120 it took off 2 and struggled with the 3rd the compressor on it will take them all.... now I just need to cut them up to fit the blazer... and get a compressor plumbed to the tanks....
bergerking
1/2 ton status
new jets...... flex test with Ethel 
The DirtyC getting fuel
Heading the way!
Heading the way!
bergerking
1/2 ton status
took a morning trip with @sreidmx and sweet @Dil.Pickle witch turned out to be an all day adventure... 
actually jumped the blazer today... shocked the shit out of me she usually don't leave the ground.... anyway all rigs made it home... now I got it back at my place the sliders and all the small bullshit will start getting attention....
actually jumped the blazer today... shocked the shit out of me she usually don't leave the ground.... anyway all rigs made it home... now I got it back at my place the sliders and all the small bullshit will start getting attention....
Good run yesterday!
Looks like you gained some travel with the new jets!
bergerking
1/2 ton status
cut to size.... hopefully my lazy Ass will have them done this weekend
bergerking
1/2 ton status
Its enough to put your toe on but I'll measure it when I get them on but they appeared to be square with the door...
Good place for the air port.
bergerking
1/2 ton status
best place I could put it.... without to many snag problems and still easy to access... I plan on boxing it in with a piece of angle
bergerking
1/2 ton status
sliders not installed but I got my gas cans rear lights and rock lights installed....
bergerking
1/2 ton status
one side done ( no air lines yet ) 115 degrees in the garage.... might attempt the other....
