Right on!!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
I like it!! 
May I ask two questions?
What is the tube by the frame in the left rear wheel well?
And where's your heater? You live in Idaho with no heater?
May I ask two questions?
What is the tube by the frame in the left rear wheel well?
And where's your heater? You live in Idaho with no heater?
The tube goes to my fuel door. And I have a Mojave heater in there. It works good.I like it!!
May I ask two questions?
What is the tube by the frame in the left rear wheel well?
And where's your heater? You live in Idaho with no heater?
Hit the hills. Edelbrock proflo is the ultimate champion. I f@#king melted the charge wire by the starter when I got stuck and started winching.
Didn't realize it til I was driving out on the road. The edelbrock efi ran all the way to 8 volts. Believe it or not. I was like 3 blocks from my house when it died. My buddy that was with me called his wife, she cruised to us and we charged the battery for 5 mins, popped right off and went home.
Found the melted wire at home. It may have been my 150amp alternator VS the stock 45 that caused this. Or the headers finally cooked it. I'll fix it and wrap it with heat tape.
Didn't realize it til I was driving out on the road. The edelbrock efi ran all the way to 8 volts. Believe it or not. I was like 3 blocks from my house when it died. My buddy that was with me called his wife, she cruised to us and we charged the battery for 5 mins, popped right off and went home.
Found the melted wire at home. It may have been my 150amp alternator VS the stock 45 that caused this. Or the headers finally cooked it. I'll fix it and wrap it with heat tape.
That’s some yum melty
What’s interesting is the fact we’ve been told for decades that none of these ignition systems will support decent spark below 12v. But I did find on TBI that anything around 8v did not run good at all
What’s interesting is the fact we’ve been told for decades that none of these ignition systems will support decent spark below 12v. But I did find on TBI that anything around 8v did not run good at all
First run shake down not bad!
You got some cool pictures!
You got some cool pictures!
I'm just here for the step side
Update time.
ORD tube doors. And a sweet metal cowl riveted to the factory hood. With holes cut for so much cold air intake action....I know it may not do shit. I wanted it tho.
I do have the edelbrock flow top whatever pro series racing off road super air filter.
ORD tube doors. And a sweet metal cowl riveted to the factory hood. With holes cut for so much cold air intake action....I know it may not do shit. I wanted it tho.
I do have the edelbrock flow top whatever pro series racing off road super air filter.
WyoSquareMan
Blood type: GM
I like the cowl where'd you get that? Also who makes your heater? I must have missed it.
Very NICE! I have a 79 long bed. I’m planning the same color.
man I miss my step sides every time you update this.
I moved back to Montana.
Installed 40x13.50r17 cooper's on battleborn beadlock wheels. I bought 5 so I have a real spare.
Need to plasma torch the front fender a little for clearance when cycled. No contact during normal driving.
Ordered all PSC steering components to replace my current hydro assist.
Installed 40x13.50r17 cooper's on battleborn beadlock wheels. I bought 5 so I have a real spare.
Need to plasma torch the front fender a little for clearance when cycled. No contact during normal driving.
Ordered all PSC steering components to replace my current hydro assist.
Looks really good!
Thanks man. Isn't nice that I spent all that time to grind down my calipers for the old 15" wheels. Only to swap to 17"s....
X2!
Very cool!
That thing looks sweet with 40s, I always wanted a stepside but now days the bed would be way to small for what I usually do.
good looking truck
Finally getting to work on this in-between jobs. Doing the best with what i have. Im not the fabrication master. I will be using 4 point belts. Ill post up more pics later. Lots more work still. Very happy to get to thus thing though. My edelbrock pro flo runs great also.
Not sure how I've missed this build before, really cool truck. 
Looking forward to more pics / updates.
Looking forward to more pics / updates.
