I'd like to make it work eventually. The compressor is missing.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Couldn't agree more
Yay! More band members!!!
I believe so. I'll look today.
I think it has to do with shackle length and placement. I put the zero rate in the centered location.
Finally got some brake hoses. Bled them and found out the long hard line that runs down the frame to the rear is leaking a lot.
Haven't pulled the yoke out yet but I'm guessingI might need a longer rear driveshaft as well...
Gave it a wash and acid bath. Cleaned up surprisingly well. Put the little ORD stickers on since they won't send me big ones.
Haven't pulled the yoke out yet but I'm guessingI might need a longer rear driveshaft as well...
Gave it a wash and acid bath. Cleaned up surprisingly well. Put the little ORD stickers on since they won't send me big ones.
Yes I'm picture whoring but that's what we like here at CK5.
Wanted to flex it out since I trimmed the fenders and set the box on. Box is not bolted down so it looks like there's a lot more frame flex than there really is.
This truck flexes pretty well I think. I didn't want to invert the springs so I didn't keep going, but I never lifted another tire off the ground when I flexed it.
Wanted to flex it out since I trimmed the fenders and set the box on. Box is not bolted down so it looks like there's a lot more frame flex than there really is.
This truck flexes pretty well I think. I didn't want to invert the springs so I didn't keep going, but I never lifted another tire off the ground when I flexed it.
greatwhitez71
1/2 ton status
Gnarly.
Finally got some brake hoses. Bled them and found out the long hard line that runs down the frame to the rear is leaking a lot.
Haven't pulled the yoke out yet but I'm guessingI might need a longer rear driveshaft as well...
Gave it a wash and acid bath. Cleaned up surprisingly well. Put the little ORD stickers on since they won't send me big ones.
I like the hubcaps. But what's with the tape on the hubs?
Why no big ORD sticker?
Martin
Martin
I like the hubcaps. But what's with the tape on the hubs?
Holding the lockouts on. I still need to find a set.
I've asked a couple times and I got little ones.
greatwhitez71
1/2 ton status
I like the hubcaps. But what's with the tape on the hubs?
beat me to it.
Totally freaking awesome!
So sexy
Doesn't Paul have any F250 parts trucks?
Martin
Martin
Looks great! Nice job!
What about the crew cab on the lift in the background?
What about the crew cab on the lift in the background?
