CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Deulings 1985 K5 Blazer, --aka Borderline Obnoxious; Silver Lake pics and Vids
- Thread starter Deuling
- Start date
Gotta love line up pics
Heres mine from last year sometime, I need to get one with my dads new k5. But that might be awhile since my rig is just a shell right now.
Heres mine from last year sometime, I need to get one with my dads new k5. But that might be awhile since my rig is just a shell right now.
Nice man! yah if the bronco was runnin i woulda had that in their too. Im startin the tear down tonight! the lady wants to come help! im gonna set her up at the sand blast booth and keep the parts coming. I want this engine too look awesome.
Well I went down to my bosses shop, both buddies that were gonna help bailed on me 
, lame. Oh well, I was only down their for about 3 hours and I got quite a bit done and the engine should be ready to take out in the morning. Even had time to blast one of the valve covers a buddy dropped off, I like the flat aluminum look alot better than the chrome.
Heres the layout at my bosses house (shop)
2 ton swivel hoist!!!
What I started with
What I ended with
Wanted to see if the headers fit, lookin sweet!!!
And heres a pic of the most janked up exhaust I bet you have ever seen!!! It changes size like 8 tims and the 90 is squashed down to like an inch maybe!!! Theirs the no power!!! haha
And I made my new valve cover all sexyfied!
Can I buy those stupid plastic allen head inserts?? Or should I just rip the rest of them out?
I would have left them chrome but it was so scratched up I took them to the sand blaster, I like the looks of it to be honest, I will prolly put some paint on top and sand the fins down.
, lame. Oh well, I was only down their for about 3 hours and I got quite a bit done and the engine should be ready to take out in the morning. Even had time to blast one of the valve covers a buddy dropped off, I like the flat aluminum look alot better than the chrome. Heres the layout at my bosses house (shop)
2 ton swivel hoist!!!
What I started with
What I ended with
Wanted to see if the headers fit, lookin sweet!!!
And heres a pic of the most janked up exhaust I bet you have ever seen!!! It changes size like 8 tims and the 90 is squashed down to like an inch maybe!!! Theirs the no power!!! haha
And I made my new valve cover all sexyfied!
Can I buy those stupid plastic allen head inserts?? Or should I just rip the rest of them out?
I would have left them chrome but it was so scratched up I took them to the sand blaster, I like the looks of it to be honest, I will prolly put some paint on top and sand the fins down.
magik235
Still Alive
You are definitely staying busy and making progress.
Always something to do!!!!
Tomorrow morning im pickin up the lady and im gonna set her up on the sandblast booth and shes gonna blast the other valve cover and all the pully brackets, I cant beleive how many brackets their are on this thing!!!
shovelbill80
1/2 ton status
nice work so far......looks like that poor 305 is gettin a little long in the tooth, huh? absolutely abysmal exhaust 
.
i'd look into a serpentine setup....way better and easy to put a York compressor on too.
is your girl gonna wear greasy overalls? i loved watchin my first wife in overalls and a dirty tank top changing the oil in her '78.......
.i'd look into a serpentine setup....way better and easy to put a York compressor on too.
is your girl gonna wear greasy overalls? i loved watchin my first wife in overalls and a dirty tank top changing the oil in her '78.......
nice change with the valve covers
remember to support the trans when you pull the motor, don't forget to watch out for the dipstick, being attached to the motor with a trans bell bolt. A lot more stuff comes off before it comes out, but shouldn't take long. Are you going up through the hood or out the core support?
remember to support the trans when you pull the motor, don't forget to watch out for the dipstick, being attached to the motor with a trans bell bolt. A lot more stuff comes off before it comes out, but shouldn't take long. Are you going up through the hood or out the core support?
Yup gonna ratchet strap the tranny up, And I planned on just going through the hood, less messing around with takin the core support out, the ac system is still pressurized
, I was gonna cut all that stuff out but not now lol. I think I will look at a serpentine setup down the road but at the moment i dont really have the funds if I want a 14 bolt in the back and my tranny built. (Also my cousin just told me about his old yamaha warrior quad that hes gonna give me a sweet deal on... I think a 4 wheeler would look cool as h3ll sittin in the back of the blazer with the top offWell im off to pick up the lady and then to the shop! Hopefully ill have that 305 sob layin on the floor when im done!!!! Idk what the heck to do with it lol. I made a CL add but nobody seems to be wanting it lol. I put up 305 for serpentine setup but no hits yet. dang.
Last edited:
all right Adam, time to shine, hope you got a pic of the lady in action...you owe the coaching staff ya know.
Hope it all goes smoothly, and nobody gets hurt...
Ok here you go dave!
And aint this the sexiest pic eva!!! lol.
Good bye 305, thanks for holdin out for me
Nice work dude!
fyi
if you got any questions about the warrior, let me know, I got two of them. One being mildly built.
if you got any questions about the warrior, let me know, I got two of them. One being mildly built.
Thanks guys!!! Yah I was pretty happy that she actually came with me to help out. She didnt get very greasy but oh well ill have to work on that
Im gonna hang out with ma mamma tomorrow for a bit and do some stuff for her around the house then im gonna go test drive that warrior and decide if I wanna get it or not. and Octane that would be sweet!!! I will def need some tips because ive never owned a quad, my grandpas got a polaris sportsman 4x4, but these are alot different.
All in all a pretty sweet day, went down their at noon and had the engine out by 4, I got a head start last night, but I would say not too bad for my first ever engine pull
Now to remember how the **** all those brackets go back on... I shoulda took more pics when I took them off lol
Im gonna hang out with ma mamma tomorrow for a bit and do some stuff for her around the house then im gonna go test drive that warrior and decide if I wanna get it or not. and Octane that would be sweet!!! I will def need some tips because ive never owned a quad, my grandpas got a polaris sportsman 4x4, but these are alot different.
All in all a pretty sweet day, went down their at noon and had the engine out by 4, I got a head start last night, but I would say not too bad for my first ever engine pull
Now to remember how the **** all those brackets go back on... I shoulda took more pics when I took them off lol
shovelbill80
1/2 ton status
nice job man
cool that your girl hangs while you wrench
it's cool your buddy helped you, but tell him to get a ****ing belt....i have no clue why someone could walk around with their pants hanging off their ass like that, let alone work on anything.......tell him he looks like an idiot in front of your girl dressed like that. i'm kinda joking.......but im not
cool that your girl hangs while you wrench
it's cool your buddy helped you, but tell him to get a ****ing belt....i have no clue why someone could walk around with their pants hanging off their ass like that, let alone work on anything.......tell him he looks like an idiot in front of your girl dressed like that. i'm kinda joking.......but im not
Hahahaha 
Yah oh well we straight up thugs you know walkin round wit our pants hangin low... lol.
Hey guys I also snagged this sweet deal. Got it all brand new for $90!!! Guy bought it a while back and decided he wanted to go with the gray interior instead. Pickin it up sometime tomorrow. I think tan on black will look way better than the gray anyways.
http://muskegon.craigslist.org/pts/2346417156.html
Yah oh well we straight up thugs you know walkin round wit our pants hangin low... lol.
Hey guys I also snagged this sweet deal. Got it all brand new for $90!!! Guy bought it a while back and decided he wanted to go with the gray interior instead. Pickin it up sometime tomorrow. I think tan on black will look way better than the gray anyways.
http://muskegon.craigslist.org/pts/2346417156.html
shovelbill80
1/2 ton status
Hahahaha
Yah oh well we straight up thugs you know walkin round wit our pants hangin low... lol.
oh boy.......
what color is your interior?
Lol i was kiddin about the first part lol
Mine is gray, so im hopin maybe if he likes some of my panels or parts we could swap some more stuff, however mine is pretty dingy and looks mostly like crap so I doubt it. But i think the tan with the black dash and seat covers and exterior will look really cool. And for that price what the heck
Also this guy lives about ten min from me and hes got 2 84 k5s so i will def be introducing him to CK5 if he doesnt already know about it
Ery body tell yo mamma happy mothers day or ill hunt you down lol.
