bad larry
1/2 ton status
Sweet!! Can i get a link to more pics of the truck?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
How will my K5/truck look with xx" tires on xx" of lift?
- Thread starter steve_kibbe
- Start date
If your talkin about mine? http://coloradok5.com/forums/showthread.php?t=289660
Looks like your back seat was added from a 70's truck considering the velour on the front seat. That and no shoulder belts in the back. Realy nice score for a truck from Chicago area.
andyblack
Registered Loser
I think that Shady's truck is some kind of custom build. I've never seen a crew cab short bed of these types of trucks. Ever. I've also never seen one with half ton axles either. It's almost like they just streched a half ton truck to accept the crew cab. I like it though for sure.
they may have used 2 half ton frames, but it only has one seem in the frame. cab is a 2wd unit I beleive. It IS a hodge podge of parts so it may not have come with a rear seat
Still finding suprises as I go
Still finding suprises as I go
tmmby119
1/2 ton status
Here is my sub, 4" lift, HD leaves front, blocks in rear, 33"x12.5" bfg atko on 15x10 wheels
love it
tmmby119
1/2 ton status
its a cheapo bedliner job.....started with the roof because of sun fade/rust problems. Rustoleum rattle can - sucks on coverage, took 6 cans just for the roof. Duplicolor Armor rattle can - the rest, I think also 6 cans. B**ch to spray, water based, dries forever, lots of runs,any little spot I've missed on prep and it peeled right off, major PITA. But looks better than the roll on stuff from Duplicolor. I will see if I can get water separator for compressor and actually shoot it over with Herculiner or Duraback after this winter.
andyblack
Registered Loser
When I painted mine flat black, I thinned Rustoleum with mineral spirits and shot it out of a cheap Harbor Frieght HVLP gun and it did pretty good. It was WAY easier than using spray cans. I think it only cost me like $60, including all the materials. It's not as durable as a bedliner would be though, that's for sure.
jose q
Newbie
hey hows it going man? my name is jose, i like the top on your blazer i wanted to now where i could get one of those
stumpbuster
1/2 ton status
big pappa b
3/4 ton status
what sizer tires are those?
shaun89
1/2 ton status
38s...in need of some grooving
shaun89
1/2 ton status
82K10SBC
Mud Slut
The Black B*tch
The stats:
Front: 8" lift superlift springs, ORD add-a-leafs, extended shackles
Rear: 6" lift procomp springs (52s), shackle flip, 5" shackles ( stock is 3.5 or 4), front springs mount moved rearward 2.5" for shackle angle
Tires: 41x14.50x16 iroks
Wheels: 16x12 w/ 4.375 BS
The stats:
Front: 8" lift superlift springs, ORD add-a-leafs, extended shackles
Rear: 6" lift procomp springs (52s), shackle flip, 5" shackles ( stock is 3.5 or 4), front springs mount moved rearward 2.5" for shackle angle
Tires: 41x14.50x16 iroks
Wheels: 16x12 w/ 4.375 BS
cameronsaddress
1/2 ton status
8" suspension / 1" body
35x12.5x15 ProComp XTreme MT / Western Wheel Cyclones
(roll bar currently out for body lift work)
35x12.5x15 ProComp XTreme MT / Western Wheel Cyclones
(roll bar currently out for body lift work)
8" suspension / 1" body
35x12.5x15 ProComp XTreme MT / Western Wheel Cyclones
(roll bar currently out for body lift work)
Much better man!
[/QUOT
Look'n good!
