Friend of mine bought special spacers for his so he could run the big tires. I don't think the factory stuff would work for sure.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Lifted crew cab dually. C to K conversion.
- Thread starter chiefheaphy
- Start date
A lot of times, it's just an optical illusion because of the taller front wheelwell openings. The way to be sure is to park it on level ground and throw and anglefinder on the top of the bedrail. I liked the way my Blazer looked with about 1-degree of forward rake. Visually it looked nicely balanced without the stinkbug look.
So the front wheel wells are bigger! I've wondered that as my truck seems level or nose down slightly but when you look at it the front always seems higher by a tad...
Yep.
If you look at a few photos above, you can see the rear opening seems to be almost 1/2 way between the upper and lower bodyside mouldings. Up front, the top of the wheelarch is more like 3/4 way up from the bottom moulding....
If you look at a few photos above, you can see the rear opening seems to be almost 1/2 way between the upper and lower bodyside mouldings. Up front, the top of the wheelarch is more like 3/4 way up from the bottom moulding....
chiefheaphy
1/2 ton status
Just drove it around a bit. Totally awesome.
So I wired the cheapo pump I got at the parts store while I wait for the carter and now my running lights wont turn off? I wired the pump with a 3 amp in line fuse directly to a spot on the fuse block that is hot in start. Thats the only thing I touched???
So I wired the cheapo pump I got at the parts store while I wait for the carter and now my running lights wont turn off? I wired the pump with a 3 amp in line fuse directly to a spot on the fuse block that is hot in start. Thats the only thing I touched???
chiefheaphy
1/2 ton status
PHASE I is done
Bull horns or no?
Bull horns or no?
bullhorns FTMFW!!!!!
No bullhorns.
Maybe if you actually lived in Texas.
Maybe if you actually lived in Texas.
NEK5
3/4 ton status
The second pic is all wrong. There should be a barn in the backround...
Dafey
1/2 ton status
Well I grew up in TX ,for 33 yrs...So I say YES to the horns !
BTW are you planning anything for the bed? It makes the truck look funny
a diffrent color.
BTW are you planning anything for the bed? It makes the truck look funny
a diffrent color.
chiefheaphy
1/2 ton status
Well I grew up in TX ,for 33 yrs...So I say YES to the horns !
BTW are you planning anything for the bed? It makes the truck look funny
a diffrent color.
Roll on bedliner.
chiefheaphy
1/2 ton status
carpeonnel
1/2 ton status
you need to take your white t-shirt off though in the second pic 
chiefheaphy
1/2 ton status
you need to take your white t-shirt off though in the second pic
i was waitin for that one
so are the horns mounted yet?
scotto0609
1/2 ton status
I was thinking of this build. Any updates?
blazerboss 85
Banned
things looking badass man
blazd88
1/2 ton status
I used to have horns on my sub. Late nights of drinking at the shop always stem something crazy.
Truck looks great btw!!!
Truck looks great btw!!!
chiefheaphy
1/2 ton status
yo
Boy its been a while since I posted. Once the good weather gets going Ima get my ass in gear on both trucks. I did find a divorced pass. drop t-case for this, but wasnt in a rush to install it after I picked up a set of dually chains!!! If it snows again I'll get a pick of with them on.
Boy its been a while since I posted. Once the good weather gets going Ima get my ass in gear on both trucks. I did find a divorced pass. drop t-case for this, but wasnt in a rush to install it after I picked up a set of dually chains!!! If it snows again I'll get a pick of with them on.
