Poorboy's 91 Build... B52's 56's FUSH, SYE

[MTBLAZER89]

Dont get a 2" bore ram if you plan on street driving this. You could get away with it in town, but it is noticeably slow if you try and do any "quick" steering inputs more than a small turn.

I run one with a modded pump and I notice it if I am spinning a doughnut, or sliding through corners and try to quickly turn out. You can feel it when you have to wait for the ram to catch up.

Just my .02 I think most guys run a 1.5" bore with no issues.

 

[POORBOYK5]

no real news to report... Dropped a small block in the truck for now. It needed to be mobile at the shop due to lack of space. did get to play with a used up demo car we were moving around the yard..

 

[63chevyll]

Nice shot. your blazer is like my burb, gets driven .013 miles a day,

In, then out

 

[POORBOYK5]

Nice shot. your blazer is like my burb, gets driven .013 miles a day,

In, then out

...Pretty much! I'm glad to be able to do that at this point!

 

[63chevyll]

We should give ourselfs.deadlines.
You, Bryan, and I all have Crap to do and have these rigs just waiting to go out and play.

 

[POORBOYK5]

We should give ourselfs.deadlines.
You, Bryan, and I all have Crap to do and have these rigs just waiting to go out and play.

I'd like to be able to be realistic and set one. But realistically, I don't have the $$ or time right now. First plan is to stable out my work objectives in the next few months. Once I'm there its game on!

 

[B.N.Z.MTNS]

Geoff,

I busted my steering gear after installing the axles you hauled out for me, so my plans for a NP241 have been on hold.

But if you run across one that is an early, non elec passenger drop, please let me know. I remember you told me that a friend of yours had a couple laying around...do you remember how much he wanted for them?

BTW, your rig looks good. Don't know if you got any hydro assist in yet, but I went with a PSC kit and I love it. Just updated my build thread with it.

Is it time to change your sig to BB13 or bust?

 

[63chevyll]

I'd like to be able to be realistic and set one. But realistically, I don't have the $$ or time right now. First plan is to stable out my work objectives in the next few months. Once I'm there its game on!

What's left on the list now its running. Maybe one night we can jam on some stuff if your Down.

Boys football is almost over, my car show is over. I have finally free time coming up

 

[POORBOYK5]

Geoff,

I busted my steering gear after installing the axles you hauled out for me, so my plans for a NP241 have been on hold.

But if you run across one that is an early, non elec passenger drop, please let me know. I remember you told me that a friend of yours had a couple laying around...do you remember how much he wanted for them?

BTW, your rig looks good. Don't know if you got any hydro assist in yet, but I went with a PSC kit and I love it. Just updated my build thread with it.

Is it time to change your sig to BB13 or bust?

Can't remember the asking price. Pretty sure he's still got them. Will check soon.

I hope to make BB13! The way my life has gone the past couple of years, I'm not counting on anything!

 

[POORBOYK5]

What's left on the list now its running. Maybe one night we can jam on some stuff if your Down.

Boys football is almost over, my car show is over. I have finally free time coming up

Suspension and steering are the major things at this point. Got lots of smaller trinket things for it too. I guess at this point I could get a couple things done that are at a minimal cost like; 63" spring swap, shackle flip and rear disc conversion. I have 99% of the stuff needed for those.

 

[POORBOYK5]

Couldn't afford the registration or the dinner.... Maiden voyage

 

[63chevyll]

So you drove it to outback, didn't go in, the asked for spare change at the front door, went across the street to 711 for nachos.

 

[POORBOYK5]

So you drove it to outback, didn't go in, the asked for spare change at the front door, went across the street to 711 for nachos.

.... What I should have done!

 

[63chevyll]

Lol. Na, shoulda made the other one buy

 

[POORBOYK5]

Lol. Na, shoulda made the other one buy

I didn't say anyone else was there

 

[63chevyll]

You SOB.

 

[POORBOYK5]

Said F it! Time for 63's, shackle flip, sye, clocking ring...

 

[B.N.Z.MTNS]

So you are not playing around anymore...huh. Maybe BB13? I'm trying to make it this year.

BTW, PM sent about the T-cases.

 

[POORBOYK5]

So I figured this is where my front hanger needs to be.. What's the best process to figure where to put the shackle flip?

 

[kgblazerfive]

I just moved my rear ones back so the front holes on the mount were in the rear holes in the frame.