sweeeeeet 
I wish I had that kind of ambition....
I wish I had that kind of ambition....CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Project OVERKILL - Ppump 24v Fummins swap started
- Thread starter DEMON44
- Start date
DEMON44
Low-Tech Redneck
OK to sum up
blending this........
with this.............
and this.........
with these rims and tires Alcoa 22.5" Michelin 255/70r22.5 are 37" tall. semi agressive tread. its an all position trailer tire. I don't care it'll work good for me
blending this........
with this.............
and this.........
with these rims and tires Alcoa 22.5" Michelin 255/70r22.5 are 37" tall. semi agressive tread. its an all position trailer tire. I don't care it'll work good for me
desertrat67
Hawk Driver
all position trailer tire. I don't care it'll work good for me
A trailer tire with a load rating thta will support 3 of your trucks with each tire. Ya, should work.
DEMON44
Low-Tech Redneck
Ya....I like that. 
and you know the disks in the back of that thing are monstrous......16" disks I'm sure. the front disks are no slouch either.
and you know the disks in the back of that thing are monstrous......16" disks I'm sure. the front disks are no slouch either.
Well this took off just like every other project around here
Sure to look pimpin' when it's done.
Sure to look pimpin' when it's done.
DEMON44
Low-Tech Redneck
some front hub beef........
DizturbedOne
1/2 ton status
wow
that is going to be one BURLY truck
that is going to be one BURLY truck
DEMON44
Low-Tech Redneck
got my new motor mounts. quad high density poly isolators. quality is there. fit and finish looks good. I like them. even took the time to mill the back of the block mount. pics don't really show it but it 1/2" plate for the block mounts and the subplates are 1/4" good beef.
Slapperbar
Retired Navy NDT Examiner
Looking good! Where'd you get 'em?
supersize75k5
OrganDonorRacing.com
are those from screamen semen offroad? Not that ive been looking into a cummins swap or anything
DEMON44
Low-Tech Redneck
no these are from auto world in Montana.
just rolled the leftovers of my chev chassis into the driveway tonight. can literally swap the engine with the chassis' being nose to nose. and having the new mounts helps.
maybe bolted in tommorrow.......we'll see.
just rolled the leftovers of my chev chassis into the driveway tonight. can literally swap the engine with the chassis' being nose to nose. and having the new mounts helps.
maybe bolted in tommorrow.......we'll see.
DEMON44
Low-Tech Redneck
not much left there now......bare crewcab frame
What did you do with the 205 I'm guessing that that isn't factory or should I say how did you do that 205
DEMON44
Low-Tech Redneck
nothing is stock anymore. the 205 is divorced obviously, out of a late '70s Ford. the OEM tcase in it was a BorgWarner 1440 I have to through that POS away still, been tripping over it for a year.
uao85
1/2 ton status
that is going to be one long ass front driveshaft, maybe you can rig it where the front and rear will be the same application so if you ever damage your rear unit, the front can be swapped out pretty easily.
Either way, that truck is going to be amazing when you are finished, and I will definitely be green with envy. Talk about beef!
Either way, that truck is going to be amazing when you are finished, and I will definitely be green with envy. Talk about beef!
DEMON44
Low-Tech Redneck
the last 2 pics are of the chevy frame with my dtrain still in it. the tcase is exactly middle. the frt and rr shafts are exactly the same length.
same will be for the new chassis. all 1410 joints too.
same will be for the new chassis. all 1410 joints too.
very cool build
DEMON44
Low-Tech Redneck
little update from today
DEMON44
Low-Tech Redneck
bare bones.........
Holy crap! I didn't realize the Chevy body would look so narrow. Or is it just how it looks in the pic?
