Wait did somebody say Ham and cheese?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
That reminds me of when I was in the AF. Our neighbor on base had these twin boys. About 2 at the time. We were over at her house and because I was in 'computers' she asked if I would look at her vcr wouldn't accept tapes. Ok, I'll take a peek. I peeked in there and sure as shit there was a PB&J in there... Said - there's your problem.... She said " I was wondering when that would show up". Guess to a 2 yr old it looks like a good place to hold your sammich..!
I think those kids swap ideas during play dates...we failed to rewind a PB and honey!
So the neighbor still isn't talking to you, is he?
LMAO!
LMAO!
Perfect time to get your doors aligned! 
Dude! What happened!
Seriously though, how hard is it to get that fender off? I need to align my driver door, it's driving me nuts.
Seriously though, how hard is it to get that fender off? I need to align my driver door, it's driving me nuts.
Josh, the fender is a giant pain to remove, compared to removing the door to gain access to the hinges and hinge bolts.
&@$# that guy. He hates dogs.
My 100 lb dog chased him into his house awhile back
They weren't so bad some door bushings won't fix it. The passenger side is quick pinned alreadyPerfect time to get your doors aligned!
Not too bad, pull the battery, 3 bolts there. 2 behind the headlight, 2 behind the turn signal, and the wheel well bokts
Doesn't sound as bad as tRustyk5 said
Having the door on quick pins helps. Takes 5 minutes to pull the door
I used an impact for all but 2 of the bolts
... just knowing how solid the truck is in those areas now is a whole different kind of the " pants fitting funny " feeling. Worth all the headache for sure.. Your grinder doesn't work in the rain or what?
i thought that might be the case lol...
you have replacement steel pannels for all those parts?
you have replacement steel pannels for all those parts?
For the passenger side I do. Need to get to drivers.
Contemplating getting the pass side fender. This ones about had it.
I was getting ready to start chopping. Ended up with the baby watching the sorry excuse for a hockey game, my wife said she was "not winning"
The littlest one is cutting teeth, so shes a little onerous
Don't forget that I have a pair of fenders that were GM replacements. They have had some trimming done to them, but would still be better than aftermarket, as far as thickness and such.
How much trimming?
With no fabbing to do, it should be done by the end of the day haha!
Are you blessed with decent squares in the junk yards for body pannels? The trimmed ones might not be a bad idea... I wish i had 37s and id just cut the rust out while trimming the rear fenders
Are you blessed with decent squares in the junk yards for body pannels? The trimmed ones might not be a bad idea... I wish i had 37s and id just cut the rust out while trimming the rear fenders
Not even a blues fan, but no. No sharksGo Sharks!!
