I don't understand this 27 spline you speakyes they have other options, you can use a 10 or 27 spline IIRC.

I don't understand this 27 spline you speakyes they have other options, you can use a 10 or 27 spline IIRC.

I don't understand this 27 spline you speak
![]()

Yep, still nothing to see in here.
![]()
Since his wife won't even tell anyone they're married I let him carry on
Service van. Couldn't have matched the bumpers more perfectly square and even if I tried. No damage no scratches. Not juicyIs the truck OK?
Service van. Couldn't have matched the bumpers more perfectly square and even if I tried. No damage no scratches. Not juicy
Never thought bout this but makes senseAlso, what ORD kit for the front?
On my 1990 Blazer, the front body mounts were removed from the frame (all three pieces still riveted to each other) and then swapped side for side. That is the cheapest way to do the 52" springs on the front. My front upper shackle hangers were still in the stock location.
Martin
It requires a bit of work, but it's a cost effective way for sureNever thought bout this but makes sense
Sounds like ned is gona look into thisIt requires a bit of work, but it's a cost effective way for sure
Bastard drop anyway...There's a 465/ 241 combo for sale in Carbondale. I know that I have seen the ad on CL before, so maybe they will come down from the $300. (Which is too much from the pictures! )
Ok I'll looky.
Red jeep Aaron said a guy in evergreen bought a pickup load of transfer cases last week. At least 2 are 203s, and several 205s and 241s. Need to wander up there and see what can be had

OkI'll take a spare 241.![]()