The Bent77 K10 now tow pig

[campfire]

yes

Oh. That explains a few things.

I'd be curious to see what your dimensions are for the measurements listed above.

 

[skunked]

Oh. That explains a few things.

I'd be curious to see what your dimensions are for the measurements listed above.

why, were those longbed dimensions?

 

[campfire]

why, were those longbed dimensions?

Yes, I thought that's what we were talking about in this thread. I don't have a SWB truck to measure.

 

[skunked]

Yes, I thought that's what we were talking about in this thread. I don't have a SWB truck to measure.

Lot's of things have been discussed. I couldn't tell you the last time I even saw a K10 longbed, I forgot they even existed.

 

[campfire]

Lot's of things have been discussed. I couldn't tell you the last time I even saw a K10 longbed, I forgot they even existed.

Isn't this thread dedicated to a long bed K10?

 

[skunked]

Isn't this thread dedicated to a long bed K10?

not really

 

[Bent77]

Right now its a rolling conversation that's actually had a good deal of tech

And since I'm on call and haven't had time to measure the long bed, y'all just keep working it out

 

[campfire]

Right now its a rolling conversation that's actually had a good deal of tech

And since I'm on call and haven't had time to measure the long bed, y'all just keep working it out

I doubt your longbed was much different than mine (dimensionally) when it was in stock form.

 

[Bent77]

I doubt your longbed was much different than mine (dimensionally) when it was in stock form.

Like @skunked mentioned tho, rear axles move back. I'll measure Monday unless @F.S.F.W wants to measure his

 

[skunked]

Like @skunked mentioned tho, rear axles move back. I'll measure Monday unless @F.S.F.W wants to measure his

We'll be here all year waiting for him

 

[Bent77]

@F.S.F.W

What parts/ manufacturers is your doubler made of?

 

[Bent77]

35" from the back of diff to end of frame

Does not account for shackle swing...

 

[F.S.F.W]

@F.S.F.W

What parts/ manufacturers is your doubler made of?

Jeeeeeez.... You invite me in here and expect me to tech... lol
It NWF with a 32 spline 203 to match the NV4500. If you are needing a 32 spline 203 input shaft I might have one. Not positive and the way my luck has been finding the parts you are looking for it would be a miracle if I do have one.

 

[Bent77]

Take the chatter to the lounge boys!

 

[campfire]

Take the chatter to the lounge boys!

Back on topic...is your axle pushed back or is your 14sf sticking further rearward than my 10 bolt? Or both?

 

[Justin V]

Actual burb tank sitting at my house is 28.125 wide and 34.75 long

 

[Justin V]

That is the flanges. Body is 26.5 by 33.25.

 

[campfire]

Actual burb tank sitting at my house is 28.125 wide and 34.75 long

The skid plate adds a small amount in front and back, but that's pretty close to the 35" that was claimed above.

 

[Bent77]

Back on topic...is your axle pushed back or is your 14sf sticking further rearward than my 10 bolt? Or both?

1" back and 9.5" ring gear

 

[Justin V]

Factory skidplate is 37.75 at the extreme edge. Also think mine might have opened up a tad when removed