CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
too far back go under oil pan. Mine go really close to the drive shaft the further it went back.
Dual stacks. Show you are a true crawler and hauler. But you will also need flip up mirrors.
I'll have to look at that, mine dumps out at an angle behind the last cylinder
No
Who are you?
orange!
It glows under there. I had intended on being able to see loose bolts and leaks. Apparently I won't need light
Just need sunglasses
1350? .188?
My exciting engineering department came up with this for where the frame kicks up and I need a x member mount
On the other side of the x member I slotted it with the hole saw and grinder for the Doubler plate offset
On the other side of the x member I slotted it with the hole saw and grinder for the Doubler plate offset
Last edited:
Took me 3 reads of that post to figure out"dram" means "frame" in bentlattin.
I see you fixed it so my post looks irrelevant. Maybe I should add some BB's to balance it out.
I just had a thought. I know how you can keep the BB' at the high end. Add a helical screw inside the tube.
What about the bottom then?
That should work
