That's just more traction for the drive home
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
WL: 1975 K5 (previously "Another new (to me) K5.")
- Thread starter 82355
- Start date
Time for a burnout.....
Be cooler if you did!
Remove rear shaft and engage parking brake
You think the park brake works?
Martin
Martin
I thought it was an official unofficial rule that no one on CK5 can have an operable parking brake. 
Yall need some parking brakes. I have mine set per spec, which is just shy of perfect.
Ya mine works great
Mine worked in my ‘76, but I haven’t tried the one in the green Blazer.
Mine works on the 77
Pencil me in for a non working parking brake
Every square I got had a bad parking brake.I thought it was an official unofficial rule that no one on CK5 can have an operable parking brake.
I always took care of it.
The problem is it's not self adjustment and even the newer ones that are, don't always work properly so you need to interfere.
Even my newer late 90s early 2000s need some attention
I need a shorter mid cable to make my park brake work.
Sure, why not....
or that rim doesn't fit the rear axle?
It's kind of an unwritten rule for me you can't get new tires without doing a burnout with the old ones. How can you let a perfectly bad tire go to waste. That would be like throwing away a rotting watermelon without shooting it.
I needed new tires on my daily last fall, which I had never done a burnout with ever, so I stopped, disabled traction control and stabilitrak, dropped it to manual 1st gear, got 'em roasting and then bumped second and let it carry for longer than I expected (the bone stock L86 is no slouch), was a nice rolling smoky burnout....the kids were laughing....and then I looked over and got "the look" from the wife. It was worth it.
I once started a grass fire and almost burnt down my house because of doing a burnout with this Blazer………..
Martin
Martin
Modified the fender trim on a tree.
Carburetor needs work.
Martin
Carburetor needs work.
Martin
Never realized this was a 400ci.
It had a 350 from the factory. The grill is from a '76 K10 I had twenty years ago. It has a 402 in it.
Martin
Anyone have a 32x11.50R15?
I might need one.
Martin
I might need one.
Martin
