Stomis
Professional Amateur
MmMmMmmmmm flat belly 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
'10 JK build (flame away)
- Thread starter iwaxmyjimmy
- Start date
What's up with your front drive shaft?
What about it? I tore the boot for the slip splines but the use rapazzi joints. It's factory ****. Not the strongest but it hasn't given me trouble yet so I'll rock it till it starts screwing up.
What's a rapazzi joint?
Stomis
Professional Amateur
Its the same type of setup in a toyota front axle shaft or very similar to it.
Some other pictures for the flat belly and rear shock towers
Oh and I remade my frameside trackbar mount.
Oh and I remade my frameside trackbar mount.
Did a shakedown run on the doran/odessa loop at calico
Need to add in a crossmember for the back of the belly pan, and tweak the crossover pipe to clear it. Everything worked pretty good, was really happy with it. Its nice not dragging the belly at all
Need to add in a crossmember for the back of the belly pan, and tweak the crossover pipe to clear it. Everything worked pretty good, was really happy with it. Its nice not dragging the belly at all
Switched to TREs since im moving back to NC
Also added the rear crossmember and made the oil pan portion of my belly pan
Also added the rear crossmember and made the oil pan portion of my belly pan
What's the deal with tie rod ends and NC?
Was running heims and moving back to NC tomorrow, my dads health aint that great. Id rather have TREs in that humid rains when it feels like climate.
Sorry to hear that.
Gotcha on the heims. Not great for DD survivability.
Gotcha on the heims. Not great for DD survivability.
How's this been doing?
I haven't wheeled it besides a few creek paths since I moved back to NC. Went to 38.5x14.5 TSL/SXs and put a 1310 CV rear drive shaft in it. Other than that just been changing the oil and putting fuel in it.
Too bad about the not wheeling part, but it's great you've been able to just drive and maintain instead of fixing.
Always uwharrie to go to.
Still got that jimmy?
Still got that jimmy?
How about a picture of it on the new tires?
This thing is cool.
Still have the jimmy. Got the 60 in it, brakes all done, put the engine back in it. Just replaced the fuel tank from rust, waiting on a new fuel filter to get in so I can dial in the timing and hopefully drive it around the block.
