Only like a hundred or so more tubes to do 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Only like a hundred or so more tubes to do
I know, I'm chipping away at it.
Its cool you have a worklight to light it up at night.
Also did I mention this was the easy part. Now comes triangles!!!! And stupid weird notching
Also did I mention this was the easy part. Now comes triangles!!!! And stupid weird notching
full verts are so much easier to access.
I hate notching on bends. Takes me forever so you got the hard part for me done. I may buy bend tech just to have the templates for notching on a bend, that or that funky needle tool
I got a Pipe Master and it has been very useful. With my notcher it gets me about 95% of the way there and then I've just had a little shaping to do with the grinder to have a good fit.
Glad you could make it work man. I hate those things
I have one kicking around the garage too, didn't care for it either.
Its definitely not perfect but it increases the guesstimation efficiency quite a bit.
More working by candle power
Got the two horizontal bars fitted and tacked in
Got the two horizontal bars fitted and tacked in
Looks good, I'm about to bend mine up. Is that 1 3/4"?
Yeah 1-3/4 dom
- Joined
- Mar 3, 2000
- Posts
- 9,127
- Reaction score
- 7,092
I look forward to seeing it done at the bash...
Progress pic, front bars tacked in and adding in rear triangulation.
Rear triangulation tacked in.
It’s coming together. I can sit in the back and have plenty of head room. I think I’m down to 7 pieces left to add
I see dead nodes....
Nah they aren’t dead, just hanging out.
Making a big push tonight. Got a dash bar tacked in, tied both sides of the B bar together near the floor and cut out the last few tie in pieces.
I had a few extra hands including @the_blaze to help me pull the cage so I can fully weld it.
I had a few extra hands including @the_blaze to help me pull the cage so I can fully weld it.
Just caught up. Looking great - clean work.
David
David
