CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
:haha:

Glad that you posted that!
I had a buddy do that with a much taller pile years ago, like 1986...
His Jeep with big 33s had to get pulled down off from my C10.
 
Been having some issues with my HID ballasts turning off and have never been satisfied with the light output overall. So a while back I picked up some LED bulbs and mothballed them until I was motivated enough to make the change, that happened last night and they seem to be working like I hoped. Bulbs came with a different connector so I used some solder and heat shrink to make it work. Still not super happy with the housings but they will do for now.

4F350AD6-6276-4391-B2F4-5A5E80EEA7AE.jpeg

D599D0F4-F622-4229-8A78-2BBAA2012F6C.jpeg
 
Had an issue that’s been plaguing me for a while. Back in 07-08 when I switched out to HEI I just used spade terminals to wire the power and the tack to the distributor. Well this worked for a while but the power connector has been loosening and falling off. Pretty sure this is what caused my distributor issues at BB2017. Happened again a week ago so I ordered up the correct pigtail for the distributor and got that wired in. Best part, it clips on.

9F2C50C5-2B3C-4193-8F52-7E8E51812967.jpeg

F132D936-6528-4E97-80D6-CC985ED8686E.jpeg
Also ordered up a FAST throttle and tv bracket to fix my binding throttle cable and it looks nice.
9B927C87-992B-4AE5-BBFA-838EF3999E47.jpeg
36BF0AE1-63BF-4F6F-B597-42A3597E2B36.jpeg

Found a new use for my trailer, made working on it a ton easier than climbing in.
4810A4C4-4DD3-4CC9-A6D3-7D152F18490E.jpeg
 
btw, now that I can see that pic on the computer screen, make sure you spray off all that salt asap!!
 
Plan to today after work, been too cold the last few days it would just freeze back on the truck.
 
Top Bottom