I went with this. Works like I expected.
http://www.jegs.com/webapp/wcs/stor...0002&langId=-1&productId=536521&storeId=10001
http://www.jegs.com/webapp/wcs/stor...0002&langId=-1&productId=536521&storeId=10001
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
1982 C/K 6.0L Caitlyn Mall Crawler (Interior time)
- Thread starter Babaganoosh
- Start date
1982 c/k 6.0L Overbuilt Mall Crawler Build. (LMC headlight relay kit)
Don't you dare talk like that!!
I'm running the LMC kit for the dual headlights on my suburban. They're really bright, the lock tabs on the connectors broke the first time I plugged them in but otherwise, I like them. You could easily swap to GM weatherpack connectors while it's all apart but mine are still holding together. I check them once in a while and I've never noticed them coming loose at all.
It would be really easy to set it up so that the low beams stay on when you turn on the high beams. I need to do that to mine still. Even as it is I have almost no need for additional front lighting.
Ok the pressure is sitting in. I need more money and time.Idk if I will make it but there is always next year.
Don't you dare talk like that!!
I'm running the LMC kit for the dual headlights on my suburban. They're really bright, the lock tabs on the connectors broke the first time I plugged them in but otherwise, I like them. You could easily swap to GM weatherpack connectors while it's all apart but mine are still holding together. I check them once in a while and I've never noticed them coming loose at all.
It would be really easy to set it up so that the low beams stay on when you turn on the high beams. I need to do that to mine still. Even as it is I have almost no need for additional front lighting.
I'm going to try my best but man is it cutting close. The engine hasn't even ran yet.
beags86
Eastbound and Down
Well it ran before I pulled it apart.... We will see if I can assemble a top end of a engine properly.
It should run but there is always worst case scenario Shawn has spare ls engines that will get slammed in if it comes down to it.
And to top it off, as soon as it runs it has to go into daily driver mode. hello AAA towing.
It should run but there is always worst case scenario Shawn has spare ls engines that will get slammed in if it comes down to it.
And to top it off, as soon as it runs it has to go into daily driver mode.
hello AAA towing.
Bought lunch for the next week for 5 bucks.
beags86
Eastbound and Down
If so that's hardcore.
.36 cent burritos and .25 cent cup of noodles...Good food can wait I need this to make blazer bash.
So...this has turned into the burrito build now?
I have the feeling I've heard this before.
I'm rooting for ya...Getterdone!
Burrito and food warmer are on the list of items.
I want to take this truck on expo runs and want it very streetable and capable.
I want to take this truck on expo runs and want it very streetable and capable.
ECM has it's bench tune done, that is a huge load off my back sense it was a unknown condition.
Better than a lounge chair tune..
When it's running and driving it will get the street and dyno tune.
Hoping for 300 to the wheel.
Hoping for 300 to the wheel.
X2 Wade, if this went in the factory location that would be perfect.
Jester1
1/2 ton status
Whats wrong with the windshield on a hot summer day, you live in AZ for god sake. Or at least on the intake that has worked well on past hunting trips for us.
LS intake manifolds are a little more difficult to cook on. I've thought about building something tapped into one of my heater hoses to warm up food.
Because having the excuse to build one and telling someone you have one is way cooler and plus the cab will have air conditioning.
Today's agenda is better working breaks and a fuel system.
Jester1
1/2 ton status
I think there is some expo/backwoods oven thing that universally attach to the exaust. I have seen some offroad trucks and snowmobiles that have them.
Nice work on this so far really good to see it moving forward. The confidence level in you post has gone up to....
From i want to maybe do this, to this is what is getting done.
Good on ya
Nice work on this so far really good to see it moving forward. The confidence level in you post has gone up to....
From i want to maybe do this, to this is what is getting done.
Good on ya
In Shawn we trust, seriously couldn't have done this without him!
