CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
LSX454 swapped 95 BASS burb.
- Thread starter shady
- Start date
Little lower, little cooler, bigger sounds.
Luke is correct, a datalog will tell you what the IAC is supposed to do, but not what it actually does. The IAC doesn't have that capability to give relative position to the ECU for recording.
Now, if the datalog is saying its doing funny things, that could still be an indication of a problem. But if the IAC is faulty and the engine is stalling its probably going to say its opening when in reality it may not be.
Yeah. It likes the new converter 
This took about 1 second to spin em to 6000r's,
Then let it creep forward a half second or so, let off the brake entirely and let her eat.
As for the starting thing. It hasn't done it in a while now, rainy days or not
This took about 1 second to spin em to 6000r's,
Then let it creep forward a half second or so, let off the brake entirely and let her eat.
As for the starting thing. It hasn't done it in a while now, rainy days or not
Overall...... I'm currently happy as F**k with it
The ability to do rolling burnouts would be awesome, but when you juice up a pig, you can only expect so much.
Getting REAL close to swapping rear tires finally.
Next set is one size skinnier, but .75" taller. So probably about the same .
Eventually, I'll get to putting wheels identical to these back on it. (Probably without the rings, or thinner ones). So i can go down to 245's.
Then we'll get some LONG posi marks lol.
The ability to do rolling burnouts would be awesome, but when you juice up a pig, you can only expect so much.
Getting REAL close to swapping rear tires finally.
Next set is one size skinnier, but .75" taller. So probably about the same .
Eventually, I'll get to putting wheels identical to these back on it. (Probably without the rings, or thinner ones). So i can go down to 245's.
Then we'll get some LONG posi marks lol.
Your description isn't clear on the tire sizes.Overall...... I'm currently happy as F**k with it
The ability to do rolling burnouts would be awesome, but when you juice up a pig, you can only expect so much.
Getting REAL close to swapping rear tires finally.
Next set is one size skinnier, but .75" taller. So probably about the same .
Eventually, I'll get to putting wheels identical to these back on it. (Probably without the rings, or thinner ones). So i can go down to 245's.
Then we'll get some LONG posi marks lol.
Can you post the 2 sizes?
Currently on the truck
Front 275/45/20. 29.8" tall. 10.8" section width.
Rear. 285/50/20. 31.3. 11.7
These are the same make/model lol.
Next up I have 2 options.
Probably taking option 1.... But
Opt. 1
Just change rears to 275/55/20. 31.9". 11.2"
Opt. 2
Swap current fronts to the rear, and put
255/45/20s on front. 29.1". 10"
When I go to the 16"s for fun, it'll be 245/75/16
30.5". 9.8"
Front 275/45/20. 29.8" tall. 10.8" section width.
Rear. 285/50/20. 31.3. 11.7
These are the same make/model lol.
Next up I have 2 options.
Probably taking option 1.... But
Opt. 1
Just change rears to 275/55/20. 31.9". 11.2"
Opt. 2
Swap current fronts to the rear, and put
255/45/20s on front. 29.1". 10"
When I go to the 16"s for fun, it'll be 245/75/16
30.5". 9.8"
Ok so different height but close enough.Currently on the truck
Front 275/45/20. 29.8" tall. 10.8" section width.
Rear. 285/50/20. 31.3. 11.7
These are the same make/model lol.
View attachment 533497View attachment 533498
Next up I have 2 options.
Probably taking option 1.... But
Opt. 1
Just change rears to 275/55/20. 31.9". 11.2"
Opt. 2
Swap current fronts to the rear, and put
255/45/20s on front. 29.1". 10"
When I go to the 16"s for fun, it'll be 245/75/16
30.5". 9.8"
You said about the same i thought you thought they are the same.
By the way .75" taller means .375" higher because it's half the diameter difference.
You might get more height from the new tread than difference in size
I was thinking the skinnier gives a better chance of breaking them free, but the newer tread, and taller tire, makes for a little less final drive, so figured the difference in burnout ability would be an un-noticable wash.
It'll be better when I go to smaller diameter AND skinnier lol.
It'll be better when I go to smaller diameter AND skinnier lol.
Ok..
The current front and back are both Yokohama geolander... But the fronts are X-CV
And the rears are H/T
The current fronts were bought as rears, and the 255/45s were bought as the fronts.
Those match.
The current front and back are both Yokohama geolander... But the fronts are X-CV
And the rears are H/T
The current fronts were bought as rears, and the 255/45s were bought as the fronts.
Those match.
First car show I'll have ever entered.
Tomorrow morning.
Don't care if a single person votes for my chit.
Just want to put it in there because regardless of what anyone else thinks of it....
I'M FUGGIN PROUD OF IT!
I can stand back, look at it and say "I DID THAT!"
Interior, chit as it is, and minor paint flaws I've found..... Fug it. It's came a LONG ways, and if I finished it all at once, what the ell else would I have to do.... ?
Work on the house? It keeps me warm n dry, so fug that too lol.
Celebratory moment... So beer and Jack Bonded
Tomorrow morning.
Don't care if a single person votes for my chit.
Just want to put it in there because regardless of what anyone else thinks of it....
I'M FUGGIN PROUD OF IT!
I can stand back, look at it and say "I DID THAT!"
Interior, chit as it is, and minor paint flaws I've found..... Fug it. It's came a LONG ways, and if I finished it all at once, what the ell else would I have to do.... ?
Work on the house? It keeps me warm n dry, so fug that too lol.
Celebratory moment... So beer and Jack Bonded
